.jpg)
|
300W PFC Single Output Battery Charger |
Designed for lead acid batteries featuring 3 stage charging characteristics and the automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-300 can comply with the harmonic requirements of EN61000-3-2 & equiped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household... |
MORE INFO |
.jpg)
|
360W PFC Single Output Battery Charger |
Designed for lead acid batteries featuring 3 stage charging characteristics, automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-360 can comply with the harmonic requirements of EN61000-3-2. Equiped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household and... |
MORE INFO |
|
60W Single Output Open Frame Medical PSU |
Developed for medical and IT applications with the requirement of reduced profiles and complying with both medical and industrial agency standards these units can deliver their fully rated output of 50 to 60W with inly free air convection and aso have 10% more peak load capability than their larger rivals. Featuring only 200uA of leakage current at 264Vac they can be installed into non-patient contact medical equipment and still comply with Class B EMI regulations. Standard functions inclulde... |
MORE INFO |
|
100W Single Output Class 2 Power Unit |
CLG-100 is a universal AC input switching power unit with active PFC function for LED lighting applications. This limited power soruce complies with UL1310 Class II and has a high IP level design at IP67, protecting the components from dust and moisture damage and making it useable for indoor and outdoor applications. The unit is also totally waterproof and can be immersed in water up to depths of 1 meter. |
MORE INFO |
|
100W Single Output Class 2 Power Unit |
PLN-100 is a universal AC input switching power unit with active PFC function for LED lighting applications. This limited power soruce complies with UL1310 Class II and has a high IP level design at IP64, protecting the components from dust and moisture damage and making it useable for indoor and outdoor applications requiring low levels of waterproofing. |
MORE INFO |
|
35W Single Output Open Frame Power Supply |
PS-35 Series are miniature open frame switching power supplies with a profile of 4" x 2" targeting the miniature trend of electronic products in general industrial applications. Inserting the latest circuit design concepts the range is able to provide efficiency up to 6% higher than the first generation of PCB products and full load power via free air convection at 50°C. Complying with UL, cUL, TUV, CB and CE global safety and performance standards and possessing complete protection mechanisms... |
MORE INFO |
.jpg)
|
1000W PFC Parallel Function Enclosed Power Supply |
With power factor correction and parallel function this series targets 1U low profile and high wattage applications. Featuring 10.67W/in3 extremely high power density RPS-1000 series can provide rated output wattage even at 100VAC input because of its high efficiency design. With built in trimming function the output voltage can be adjusted between 40% and 110% rated value by adding an external voltage source or resistors. Other standard features include remote sense, remote ON/OFF control,... |
MORE INFO |
|
500W Single Output U Bracket PFC Function PSU |
Featuring advanced technology for high efficiency, USP-500 possesses up to 90% of efficiency, even for the 12V model. With the capability of supplying 400W using free air convection alone, it is perfectly suitable for fanless usage; by applying 23.5CFM of system forced air, an even higher output of 500W can be obtained. With 6.2W/ in3 of high power density, USP-500 series is a compact 90~264V switcher that is ideal for 1U (1.75-inch) installations. Samples available Now,... |
MORE INFO |
|
30W Single Output UL1310 Class 2 IP64 Power Supply |
These limited power sources comply with UL1310 class 2 that under any situation the output power will remain less than 100VA or 5A. This will significantly reduce the hazardous condition exposed to the technicians who execute the construction or maintenance of the LED lighting system. The IP64 enclosure design can protect the electronic components against dust and moisture and makes them suitable for use at indoor or outdoor locations.
Thanks to the simplified single stage PFC topology, the... |
MORE INFO |
.jpg)
|
60W Single Output Class 2 Power Unit |
A 60W enclosed type switching power supply with universal AC input and active PFC function. This limited power source complies with UL1310 Class II and has a high IP level design at IP67, protecting the components from dust and moisture damage and making it useable for indoor and outdoor applications. |
MORE INFO |
|
60W Single Output Class 2 Power Unit |
A 60W AC/DC enclosed type switching power supply with universal AC input and active PFC function. These limited power sources comply with UL1310 Class II that under any situation the output power will be less than 100VA to 5A. The high IP64 level design can protect the electronic components from dust and moisture damage and making it useable for indoor and outdoor applications.
Thanks to the simplified single stage PFC topology the required high power factor for the lighting industry can be... |
MORE INFO |
|
250W Isolated Dual Output PFC Function PSU |
A 250W dual output product with isolated outputs and PFC function designed to be used as an open frame or enclosed product. These compact 90~264V switchmode power supplies with active PFC are ideal for 1U installations. The isolated design between CH1 and CH2 can significantly prevent noise sourcing of motor action from entering control circuits and hence secure accurate operation of the end equipment. Accompany with the optional L-Bracket and cover to provide more alternatives to system... |
MORE INFO |
|
20W Miniture Single Output Din Rail PSU |
MDR-20 Series is a slim line DIN rail 15W to 24W Class I switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Featuring up to 84% efficiency this series can be cooled using only free air convection up to 70°C which significantly increases the reliability and lifetime of the power supply. Other standard features include its low no load power consumption, to save energy, short circuit, over load and over voltage protections and the DC... |
MORE INFO |
|
40W Miniture Single Output Industrial Din Rail PSU |
MDR-40 Series is a slim line DIN rail Class I switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Featuring up to 85% efficiency this series can be cooled using only free air convection up to 70°C which significantly increases the reliability and lifetime of the power supply. Other standard features include its low no load power consumption, to save energy, short circuit, over load and over voltage protections and the DC OK relay... |
MORE INFO |
|
60W Miniture Single Output Din Rail PSU |
MDR-60 Series is a slim line DIN rail Class I switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Featuring up to 85% efficiency this series can be cooled using only free air convection up to 70°C which significantly increases the reliability and lifetime of the power supply. Other standard features include its low no load power consumption, to save energy, short circuit, over load and over voltage protections and the DC OK relay... |
MORE INFO |
|
18W IEC320 C8 AC-DC Green Mode Desktop Adapter |
To fulfil the global trend of energy-saving and environment protection these 18W green mode adaptors comply with California Energy Commission (CEC) Level IV and Energy Star Program standards. The adaptors also bear global safety certificates. Featuring CEC Level IV compliant for 5~48V models, they are 90~264Vac full range input switchers with short circuit, overload, and over voltage protections. There are IEC320-C 8 and C14 AC inlet options that can be chosen to best suit your application. |
MORE INFO |
|
25W IEC320 C14 AC-DC Green Mode Desktop Adapter |
To fulfil the global trend of energy-saving and environment protection these 25W green mode adaptors comply with California Energy Commission (CEC) Level IV and Energy Star Program standards. The adaptors also bear global safety certificates. Featuring CEC Level IV compliant for 5~48V models, they are 90~264Vac full range input switchers with short circuit, overload, and over voltage protections. There are IEC320-C 8 and C14 AC inlet options that can be chosen to best suit your application. |
MORE INFO |
|
75W AC-DC Miniture Single Output Medical PSU |
Complying with both medical and industrial agency standards, these units can deliver their full rated output of 75W with only free air convection and up to 100W by providing 23.5CFM forced air. Featuring only 200µA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B EMI regulations. Standard functions include short circuit, over load, over voltage protections, and the operating temperature can be as high as 70°C under... |
MORE INFO |
.jpg)
|
30W AC-DC Power Adapter with Charging Function |
Universal AC input 30W lithium ion battery chargers designed with energy saving and the environment in mind, they also comply with global safety requirements and the 2002/95/EC RoHS requirements. No load power consumption <1W, dual colour LED, to indicate charging status, and built in short curcuit, over load, over voltage and over temperature protections are the main features of this series. GC30 is especially suitable for charging lithium ion batteries in all kinds of end product and the... |
MORE INFO |
|
1000W Front End Power System |
1U low profile 19" rack mount power solution consisting of 1 to 3 hot-swappable RCP-1000 units that, up to 3000W, can be provided in a single rack. Featuring active PFC and 10.67W/in2 extremely high power density. With the ability to provide rated output wattage even at 100VAC input, due to its high efficiency design, and three output voltage levels that can allow 12V@180A, 24V@120A, 48V@63A to be selected as the front end power configuration. The racks can also be paralleled together (up to 3... |
MORE INFO |
|
3000W Front End Rack System |
1U low profile 19" rack mount power solution consisting of 1 to 3 hot-swappable RCP-1000 units that, up to 3000W, can be provided in a single rack. Featuring active PFC and 10.67W/in2 extremely high power density. With the ability to provide rated output wattage even at 100VAC input, due to its high efficiency design, and three output voltage levels that can allow 12V@180A, 24V@120A, 48V@63A to be selected as the front end power configuration. The racks can also be paralleled together (up to 3... |
MORE INFO |
|
Din Rail Instal Redundant Module |
20A redundancy (decoupling) module for 24Vdc power system. Containing 2 sets of 20A Or-ing diodes with wonderful heat dissipation deployment, DR-RDN20 gives you a new option for safe connection of 1+1 redundant set-up. Not only perfectly decoupling power sources from each other but also from the load, DR-RDN-20 also provides users monitoring signals for both input channels through the built-in relays. Since there's no switching components inside the module, DR-RDN-20 will not generate... |
MORE INFO |
|
40A Uninteruptable Power Supply |
40A max DC UPS (battery control) module, for 24Vdc power system. Accompanied by external batteries (not included), it can back-up up to 40A of current to critical loads for a period of time dependant on the capacity of batteries. With complete monitoring signals and LED indicators for DC BUS OK, Battery Fail, Battery Discharge, and the repeated Battery Test function to check the situation of external batteries, users can customize their own DC UPS system to back up critical loads and capture... |
MORE INFO |
|
10W DC-DC Single Output Regulated Converter |
10W DC/DC converters low wattage range, for the emerging trend of distributed power applications, featuring 4:1 wide DC input range and 1500VDC input/output isolation, NSD10 series has two kinds of DC input level – 12V, 48V, and eight kinds of DC output level accross the series'. Standard functions include remote ON/OFF control, short circuit, over load, and over voltage protections. These economical gadgets are suitable for applications using distributed power architecture that transfer the... |
MORE INFO |
|
10W DC-DC Dual Output Regulated Converter |
10W DC/DC converters low wattage range, for the emerging trend of distributed power applications, featuring 4:1 wide DC input range and 1500VDC input/output isolation, NSD10 series has two kinds of DC input level – 12V, 48V, and eight kinds of DC output levels accross the series'. Standard functions include remote ON/OFF control, short circuit, over load, and over voltage protections. These economical gadgets are suitable for applications using distributed power architecture that transfer the... |
MORE INFO |
|
15W DC-DC Single Output Regulated Converter |
15W DC/DC converters low wattage range, for the emerging trend of distributed power applications, featuring 4:1 wide DC input range and 1500VDC input/output isolation, NSD15 series has two kinds of DC input level – 12V, 48V, and seven kinds of DC output level accross the series'. Standard functions include remote ON/OFF control, short circuit, over load, and over voltage protections. These economical gadgets are suitable for applications using distributed power architecture that transfer the... |
MORE INFO |
|
15W DC-DC Dual Output Regulated Converter |
15W DC/DC converters low wattage range, for the emerging trend of distributed power applications, featuring 4:1 wide DC input range and 1500VDC input/output isolation, NSD15 series has two kinds of DC input level – 12V, 48V, and seven kinds of DC output levels accross the series'. Standard functions include remote ON/OFF control, short circuit, over load, and over voltage protections. These economical gadgets are suitable for applications using distributed power architecture that transfer the... |
MORE INFO |
|
80W Green Mode Single Output AC-DC Desktop Adapter |
Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3 watts and average efficiency >85% that comply with worldwide green power requirements. SNP-A08X is for Calss II input and SNP-A08X-3 is for Class I input. With 50% more peak power capability these units can offer a cost effective solution for loadings such as motoring, solenoid, capacitive bank etc. Samples Available Now
Safety Approvals Expected Q2 2007 |
MORE INFO |
|
125W Dual Output Switching Power Supply |
RID-125-1205 & RID-125-2405 are AC/DC switching power supplies that can provide 125W using air convection. RID-125-1205 & 2405 can withstand 300VAC input surge for 5 seconds and 5G vibration that is suitable to be operated in harsh environment. Possessing 12V or 24V main output channel (CH1) with up to 180% of high peak load capability and 5V/3A (CH2) for logic control usage. The isolated design between CH1 and CH2 can significantly prevent noise sourcing from the motor action from entering... |
MORE INFO |
.jpg)
|
1000W 48Vdc Input Single Output DC-DC Converter |
SD-1000 Series enclosed 1U DC-DC converter, for the growing demand of high wattage dc/dc applications. Features 4:1~2:1 wide DC input range and 2000VAC input/output isolation, with 19~72V input levels. Other standard features include 12V/0.25A auxiliary output, output OK signal, remote on/off control and remote sense functions as well as short circuit, over load, over voltage and over temperature protections. |
MORE INFO |
|
100W Miniture Single Output DIN Rail Power Supply |
MDR-100 Series is a slim line DIN rail Class I switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of the power supply. Other standard features include its low no load power consumption, to save energy, short circuit, over load and over voltage protections and DC OK relay... |
MORE INFO |
|
100W Single Output Class II DIN Rail Power Supply |
DR-100 Series is a Class II switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Other standard features include its low no load power consumption, to save energy, short circuit, over load, over voltage and over temperature protections. |
MORE INFO |
.jpg)
|
60W Single Output Class II Switching Power Supply |
ELN-60 Series is a 60W AC/DC enclosed switching power supply targeting economical lighting applications. Of a non-PFC design, to keep costs low, the unit still complies with UL1310 Class 2 and the IP64 design ensures the components are protected from dust & moisture for application in harsher locations than most power supplies. |
MORE INFO |
|
30W Single Output Switching Power Supply |
ELN-30 Series is a 30W AC/DC Enclosed type switching power supply, with IP64 rated fully enclosed plastic case, designed to add to our economical lighting application power supply products. ELN-30 has a non-PFC design to keep the cost down but still complies with the requirements of UL1310 Class 2. The output power of these limited power sources will be less than 100VA or 5A under any situation, making the risk of hazardous exposure to maintenance engineers reduced. Other standard functions... |
MORE INFO |
|
15W Single Output AC-DC Switching Power Supply |
The new RS-15 Series are 20% smaller than their 20W counterpart and are our most miniature AC/DC enclosed type switching power supplies that can provide 15W by only free air convection. RS-15 is fully RoHS compliant and all the electrolytic capacitors in the unit are rated in 105°C. RS-15 can also withstand 300VAC input surge for 5 seconds and 5G vibration meaning that is suitable for operation in harsh environments. Full output wattage can be provided up to 50°C and the highest operating... |
MORE INFO |
|
100W AC-DC ATX Power Adapter |
ATX-100, a fanless ATX power in a desktop adapter style plastic enclosure, is rated for 100W continuous power and possesses the capability of 125W or 150W peak load for short periods. With built in active PFC function ATX-100 can fulfill the requirements of harmonic current as per EN-61000-3-2 with no load power consumption of <1W. |
MORE INFO |
.jpg)
|
1000W 96Vdc Input Single Output DC-DC Converter |
SD-1000 Series enclosed 1U DC-DC converter, for the growing demand of high wattage dc/dc applications. Features 4:1~2:1 wide DC input range and 2000VAC input/output isolation, with 72~144V input levels. Other standard features include 12V/0.25A auxiliary output, output OK signal, remote on/off control and remote sense functions as well as short circuit, over load, over voltage and over temperature protections. |
MORE INFO |
|
150W Constant Current Single Output Switching PSU |
|
MORE INFO |
|
500W 24V Input Single Output DC-DC Converter |
A compact 500W single output DC-DC Converter with 19 ~ 72VDC input and output level options of 12V, 24V and 48V. With built-in short circuit, over load, over voltage, over temperature and input polarity protections this range also includes functions such as output OK signal, remote ON/OFF control and remote sense function. |
MORE INFO |
|
500W 96V Input Single Output DC-DC Converter |
A compact 500W single output DC-DC Converter with 72~144VDC input and output level options of 12V, 24V and 48V. With built-in short circuit, over load, over voltage, over temperature and input polarity protections this range also includes functions such as output OK signal, remote ON/OFF control and remote sense function. |
MORE INFO |
|
10W Single Output Industrial Din Rail Power Supply |
|
MORE INFO |
