SPP-100P-05 - 100W Single Output AC-DC Open Frame Power Supply
Home > Products >Open Frame > SPP-100P Series 100W Single Output AC-DC Open Frame Power Supply > 100W Single Output AC-DC Open Frame Power Supply
|
Features- Universal AC input with active power factor correction, P.F.>0.95
- Over load, over voltage & short circuit protection
- Built-in EMI filter, low ripple noise
- Output voltage ±10% adjustment
- 100% 50°C burn-in test
- Meet UL, cUL, TUV standard
Standards

Case Details
222 x 62 x 34 mm
|
General Specifications
| Input Voltage |
90V --- 264V Universal full range, single phase. |
| Frequency |
47 ----- 63 Hz |
| Input Current |
<2.5A@100V AC input, full load condition |
| Inrush Current |
<30A@115V / <60A@230V AC input, full load condition. Cold start at 25℃ ambient |
| Leakage Current |
<1.5mA@264V AC input |
| Over Load Protection |
Over 105% ~ 150% of rating, shutdown. Auto recovery when fault condition been removed. |
| Short Circuit Protection |
Shutdown. Auto recovery when fault condition been removed. |
| Rise time |
<30mS |
| Hold up time |
>20mS@230V |
| Cooling |
Natural cooling, when output exceed 80W a 16CFM (min) Fan is required. |
| Temperature |
Operating: 0~70°C; derating:50°C ~70°C : 2.5%/°C. Storage: -10~+75°C |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F. |
275K hours |
| SAFETY |
UL 60950,-1st, CSA C22.2 No. 60950-1st, TUV EN 60950-1 : 2001 + A11, |
|
IEC 60950-1st, EMKO-TSE (74-SEC)207/94 standard. |
| EMI |
EN 55022 CLASS B : EN 61000-3-2,3, FCC CFR 47 PART 15 CLASS B, CNS 13438 CLASS B. |
| EMS |
EN 55024 : EN61000-4-2,3,4,5,6,8,11. |
|
Output Data
|
Voltage
|
Max. Load
|
Regulation
|
Ripple Noise (max)
|
Efficiency (TYP)
|
Max Power
|
OVP
|
|
5V
|
20A
|
±2%
|
50mV
|
76%
|
100W
|
5.8V~7.0V
|
|
 |
| Add this product to your ClipBook |