SDU-100B05 - 100W Single Output U-Bracket DC-DC Converter
Home > Products >Enclosed Power Supplies > SDU-100B Series 100W Single Output U-Bracket DC-DC Converter > 100W Single Output U-Bracket DC-DC Converter
.jpg)
|
Features- DC Input 18V ~ 56V (Typical 24V)
- Low inrush current, soft start function
- Input & output isolation
- Input polarity reverse protection
- Input under / over voltage protection
- Over load, over voltage & short circuit protection
- FR4 glass epoxy double side circuit board, meet UL-94V0
- 100% 50° burn-in test
- UL, cUL, TUV, CB, CE standard
Standards
   
Case Details
133.5 x 84 x 38 mm
|
General Specifications
| Input Voltage |
DC 18V ~ 56V (Typical 24V) |
| Input Current |
8A max at 18V DC input, full load condition |
| Max. Power |
Natural cooling: 80W; forced air cooling: 100W |
| Input Protection |
Fuse, 15A/125V |
| Over Load Protection |
Over 105% ~ 180% of rating, recovers automatically after fault condition has been removed. |
| Short Circuit Protection |
Shutdown, recovers automatically after fault condition has been removed. |
| Rise Time |
<20mS |
| Cooling |
Natural Cooling; when output exceed 80W a 16CFM (min.) DC fan is required. |
| Temperature |
Operating: 0~70°C; derating: 45°C ~70°C : 2.5%/°C. Storage: -10~+75°C |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F. |
270K hours |
| Safety |
Meet UL 60950, CSA C22.2 No.60950, TUV EN 60950, IEC 60950, EMKO-TSE (74-SEC)207/94 |
| EMI |
FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CLASS B. |
| EMS |
EN 50082-1 (1997) |
|
SDU-100B05
|
Voltage
|
Min. Load
|
Max. Load
|
Regulation
|
Ripple Noise (MAX)
|
Efficiency (TYP)
|
Over Voltage Protection
|
|
5V
|
0A
|
20A
|
±3%
|
50mV
|
72%
|
5.8 ~ 7.0V
|
|
 |
| Add this product to your ClipBook |
.jpg)
