Newsletter Signup

Keep up to date with all our new
products and services.

Featured Product

New Products

75W DC-DC Half Brick Regulated Single Output Converter

The MHB75 Series is a 75W DC-DC half brick converter with regulated single output and dimensions of...

In Development

3000W DC/AC Inverter with Solar Charger

TN-3000 Series is a high performance true sine wave DC/AC power inverter that uses high frequency...

Clipbook

You haven't added any products to your clip book yet.

Add to ClipBook

Latest Sunpower News

Custom Power Supply Metalwork
Manufacturing Services
Modified Power Supplies
Support

Request Information

 

MPQ-120B - 120W Quad Output Open Frame Medical Power Supply

Product Image - MPQ-120B - 120W Quad Output Open Frame Medical Power Supply

Standards

CBCECSUUSMEDICALTUVMedical

Dimensions

177.8 x 107.95 x 35.5mm
Add to ClipbookAdd to Clipbook
Request a QuoteRequest a Quote

Features

  • Universal AC input / Full range
  • Low leakage current <180µA
  • Protections:Short circuit/Over load/Over voltage
  • UL60601-1 medical safety approved
  • With power good and fail signal output (Optional)
  • 100% full load burn-in test
  • Fixed switching frequency at 45KHz

General Specifications

AC input voltage 90~264 VAC, 47~440Hz / 127~370VDC
AC input current Maximum input current 2.9A at 115VAC, 60Hz or 1.7A at 230VAC, 60Hz with 100% output load.
Inrush current Less than 22A at 115VAC or 45A at 230VAC at cold start conditions
Setup, rise time 500ms, 20ms / 230VAC at full load, 1200ms, 50ms / 115VAC at full load
Hold-up tiime 80ms / 230VAC at full load,14ms / 115VAC at full load
Leakage current Leakage current is less than 180µA at 264VAC
DC output adj. range Between -5%~+10% rated output voltage
Over load protection Will be activated at 110~150% rated load.
Over voltage protection 115% ~ 135% rated output voltage
Power good/Fail signal (optional) At 90% of rated value, a+5V TTL signal will be sent out with a 10~500ms delay; at least
1ms before the output voltage goes below 90% of the rated value,the TTL signal will be turned off.
Working temp. operate from -20~70°C .
Workinig humidity 20~90% RH non-condensing.
Storage temp., humidity -40~+85 °C, 10~90% RH
Temp. coefficient ±0.04%/°C on all outputs at full load between 0~50°C of ambient temperature.
Vibration 2G of acceleration,vibrating frequency adjust from 10Hz ~500Hz within a 10 min cycles
Safety standards Medical:UL60601-1, TUV EN60601-1 approved
Commercial: Also design refer to UL60950-1, TUV EN60950-1
Withstand voltage 4000VAC between input and output,1500VAC between input and F.G.,500VAC between output and F.G.
Isolation resistance >100M Ohms for I/P-O/P, I/P-FG, O/P-FG by using 500VDC test voltage.
EMI compliance Compliance Level EN55011, Class B,EN55022, Class B,EN61000-3-2,EN61000-3-3
EMS compliance Compliance Level EN61000-4-2,Level 3, 8KV,EN61000-4-2 Level 2, 4KV
EN61000-4-3 Level 2, 3V/m,Level 3, 10V/m,EN61000-4-4 Level 2, 1KV/5KHz,Level 3, 2KV/5KHz
EN61000-4-5,Level 4, 2KV/Line-Line 4KV/Line-Earth,EN61000-4-6 Level 2, 3Vrms/m,Level 3, 10Vrms/m
EN61000-4-8,Level 2, 3A/m,Level 3, 10A/m,EN61000-4-11 Compliance
ENV50204,Level 2, 3V/m, 900MHz,Level 3, 10A/m, 900MHz
MTBF 262,100 hours min at full load and 25°C of ambient temperature.

MPQ-120B Specifications

Part Number Voltage (max/rated)Current (amps)Power (watts)R&N (mV)Efficiency (%)
MPQ-120B 5V 10A 120W 80mV 71%
12V 4.2A 120mV
-5V 1A 80mV
-12V 1A 80mV

Output Data

Output VoltageRated CurrentMin. loadOutput Current ConvectionOutput current with fan (25CFM) Peak load with fan R & N (max) Voltage ToleranceLine reg.Load reg.Efficiency
5V10A2A7.3A10A11A80mVp-p±2.0%±0.5%±0.571%
12V4.2A0.5A3.1A4.2A5A120mVp-p±6.0%±1.5%±3.5%71%
-5V0.6A0A0.4A0.6A1A80mVp-p±5.0%±0.5%±1.0%71%
-12V0.6A0A0.4A0.6A1A80mVp-p±5.0%±0.5%±1.0%71%

Power Supplies with Programmable Output Voltage Function & PFC

The new SPV Series of single output enclosed power supplies increase the flexibility to users and their end systems. These full input range power supplies are available in 12V, 24V & 48V models and those output voltages are programmable from 20% to 120% by adding 1 - 6VDC external control. Other features of these programmable power supplies include wattage available up to 4500W, this range is ideal for the demands of high power applications.

Available Series are SPV-150 (150W), SPV-300 (300W), SPV-600 (600W) & SPV-1500 (1500W).

For our website dedicated to LED lighting designers and LED lighting purchasers visit PowerLED-uk.com

If you can't find what you are looking for, feel free to contact us +44 (0)845 533 1001 to discuss all your power supply needs.