| Input Voltage Range |
85 ~ 264Vac 120 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
0.88A/115Vac 0.48A/230Vac |
| Inrush Current |
35A/115Vac 65A/230Vac, cold start |
| Set Up, Rise Time |
1000ms, 50ms/230Vac 1000ms, 50ms/115Vac at full load |
| Hold Up Time |
70ms/230Vac 16ms/115Vac at full load |
| Over Load Protection |
105 ~ 160% rated output power |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut off o/p voltage, clamping by zener diode |
| Working Temperature |
-20°C ~ +60°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min.each along X, Y, Z axes; |
|
Mounting: Compliance to IEC60068-2-6 |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P:100M Ohms / 500VDC/ 25°C/ 70% RH |
| Safety Standards |
UL60950-1,TUV EN60950-1 approved, Design refers to EN50178 |
| EMC |
Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B; EN61000-3-2,-3; ENV50204; |
|
EN61000-4-2, 3, 4, 5, 6, 8, 11; EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A |
| MTBF |
1172.3K hrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
25x93x56mm (WxHxD) |
