| Input Voltage |
90 ~ 132VAC |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
0.5A/115VAC |
| Inrush Current |
40A/115VAC cold start |
| Leakage Current |
0.25mA/ 120VAC |
| Output Voltage Tolerance |
±5.0% |
| Line Regulation |
±1.0% |
| Load Regulation |
±3.0% |
| Set Up, Rise Time |
3600ms, 150ms / 115VAC |
| Hold Up Time |
20ms/115VAC at full load |
| Current Limit Protection |
±5% rated output current |
|
Constant current limiting type |
| Over Voltage Protection |
Shut off o/p voltage, clamping by zener diode |
| Over Temperature Protection |
Tj 140 typically (U1) Detect on main control IC |
|
Hiccup mode, recovers automatically after temperature goes down |
| Working Temperature |
-30°C ~ 70°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.2%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P:>100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards |
Design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSAC22.2 No. 223-M91, IP67 approved |
| EMC |
Compliance to EN55022 (CISPR22) Class A; EN61000-3-2,-3; ENV50204; |
|
EN61000-4-2,3,4,5,6,8,11; EN55024, Light industry level, criteria A |
| MTBF |
1200.6K hrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
140 x 30 x 20mm |
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors.
Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.
.jpg)
Request a Quote
Download Range Datasheet 
Add to Clipbook