| Input Voltage |
100 ~ 240VAC (85 ~ 264VAC) |
| Frequency |
47~63Hz |
| Efficiency |
77% typically |
| Power Factor |
90% minimum |
| Inrush Current |
0A, Input circuit without electrolytic capacitors (for smoothing circuit) is employed |
|
Not suitable for nuclear plant, airborne system, military, space or patient contact |
| Over Current Protection |
+3.3V, +5V, +12V & +24V All outputs are stopped and latched (except +5Vsb) |
|
-12V fold back current limiter; +5Vsb fold back |
| Over Voltge Protection |
All outputs are stopped and latched, repower off/on to recover |
| Operating Temperature |
0°C to 60°C, refer to derating curve at temperature |
| Operating Humidity |
10 to 90% non condensing |
| Storage Temperature |
-20°C to +70°C |
| Storage Humidity |
10 to 95% non condensing |
| Vibration |
At amplitude 0.075mm, frequency 10-55Hz, sweep cycle 10 the duration shall be 45mins |
|
per axis for all three axes X, Y and Z |
| Hi-Pot Voltage |
AC-DC-FG : 1500VAC min. |
| Insulation Resistance |
AC-DC-FG, DC-FG : 50Mohms |
| Leakage Current |
0.5mA max/100VAC 1mA max/200VAC |
| Line Noise Immunity |
2000V (pulse width 100/1000nS, cycle 30-100Hz, normal/common mode ± polarity for 10 minutes each) |
| Safety Standards |
UL, CSA (cUL), EN, CE Marking |
| EMC |
Meets VCCI-B, FCC-B, EN55022-B, CISPR22-B |
|
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-6, EN61000-4-8, EN61000-4-11 |
| Cooling |
Convection cooled or forced-air cooling by use of external fan |
| MTBF |
100,000Hrs min. |
.jpg)
