| Input Voltage |
90 ~ 264Vac 135 ~ 370Vdc |
| Frequency Range |
47 ~ 63Hz |
| AC Current |
0.5A / 100Vac |
| Inrush Current |
45A / 230Vac |
| Leakage Current |
0.75mA / 240Vac |
| Setup, Rise, Hold Time |
500ms, 20ms, 50ms/230Vac 500ms, 20ms, 15ms/115Vac at full load |
| Over Load Protection |
110 ~ 150% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
105 ~ 135% rated output voltage |
|
Clamp by zener diode, output short |
| Working Temperature |
0°C to +50°C (Refer to output load derating curve) |
| Working Humidity |
20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-20°C to +85°C , 10 ~ 95% RH |
| Temperature Coefficient |
±0.03% /°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC , I/P-FG:1.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25°C / 70% RH |
| Safety Standards |
UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336 |
| EMC |
Compliance to EN55022 Class B, FCC PART 15 / CISPR22 Class B, CNS13438 Class B |
|
EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A |
| MTBF |
500Khrs min. MIL-HDBK-217F(25°C) |
| DC Connector |
P1J: 2.1 x 5.5 x 11mm, tuning fork type, center positive |
| DC Cable |
UL1185 6ft (4FT for 3.3 ~ 5V output) |
.jpg)
.jpg)
.jpg)
Download Range Datasheet 
Add to Clipbook
Request a Quote