| Input Voltage Range |
90 ~ 277Vac |
| Input Frequency |
47 ~ 63Hz |
| Power Factor Correction |
PF>0.9/230VAC |
| Input Current |
0.4A/115Vac 0.2A/230Vac |
| Inrush Current |
40A/230Vac |
| Leakage Current |
0.5mA/ 240Vac |
| Output Current Adj. Range |
75% ~ 100% |
| Tolerance |
±10% |
| Line Regulation |
±3.0% |
| Load Regulation |
±10% |
| Set Up, Rise Time |
2300ms, 200ms / 230VAC 3000ms, 200ms / 115VAC at full load |
| Over Current Protection |
95 ~ 110% |
|
Hiccup current limiting, recovers automatically after fault condition is removed |
| Short Circuit Protection |
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut off o/p voltage, clamping by zener diode |
| Over Temperature Protection |
110°C ±10°C (TSW1) |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| Working Temperature |
-30°C ~ +60°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.06%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resitance |
I/P-O/P:100M Ohms/500VDC 25°C 70%RH |
| Safety Standards |
TUV EN61347-1, EN61347-2-13 approved |
| EMC |
Compliance to EN55015, EN61000-3-2 Class C(=75% load), EN61000-3-3 |
|
EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level, criteria A |
| MTBF |
643.6Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
140 x 32 x 22mm |
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors.
Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.
.jpg)
.jpg)
Request a Quote
Download Range Datasheet 
Add to Clipbook