| Input Voltage Range |
88 ~ 264Vac 124 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
0.92/230Vac 0.99/115Vac at full load |
| Efficiency |
93% |
| Input Current |
2.6A/115Vac 1.3A/230Vac |
| Inrush Current |
31A/115Vac 62A/230Vac |
| Leakage Current |
<1mA/ 240Vac |
| Set Up, Rise Time |
1500ms, 60ms/230VAC 3000ms, 60ms/115Vac at full load |
| Hold Up Time |
20ms/230Vac at full load |
| Peak Output Power |
360W (3sec.) |
| Over Load Protection |
Normally works within 110 ~ 150% rated output power for3 sec |
|
and then shut down o/p voltage with auto-recovery |
|
150 ~ 170% rated power or short circuit, constant current limiting within 3 sec |
|
and then 88 ~ 132VAC : Shut down o/p voltage with auto-recovery. 180 ~ 264VAC : |
|
Shut down o/p voltage, re-power on to recover |
| Over Voltage Protection |
Shut down o/p voltage with auto-recovery |
| ver Temperature Protection |
95°C ±5°C (TSW : detect on heatsink of power switch) |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| DC OK Relay Contact Ratings |
60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load |
| Working Temperature |
-25°C ~ +70°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 95% RH non-condensing |
| Storage Temperature, Humidity |
-20°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; |
|
Mounting: Compliance to IEC60068-2-6 |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards |
UL508, TUV EN60950-1 approved |
| EMC |
Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204, EN55024; |
|
EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A; |
|
SEMI F47 criteria A, GL approved |
| MTBF |
169.3Khrs min. MIL-HDBK-217F (25°C) |
