Newsletter Signup

Keep up to date with all our new
products and services.

Featured Product

New Products

75W DC-DC Half Brick Regulated Single Output Converter

The MHB75 Series is a 75W DC-DC half brick converter with regulated single output and dimensions of...

In Development

3000W DC/AC Inverter with Solar Charger

TN-3000 Series is a high performance true sine wave DC/AC power inverter that uses high frequency...

Clipbook

You haven't added any products to your clip book yet.

Add to ClipBook

Latest Sunpower News

Custom Power Supply Metalwork
Manufacturing Services
Modified Power Supplies
Support

Request Information

 

SDR-240-48 - 240W 48V 5A Din Rail Power Supply with PFC Function

SDR-240 Series - 240W Slim Din Rail Power Supply - SDR-240-48 - 240W 48V 5A Din Rail Power Supply with PFC Function

Standards

CULCBTUVCE
GL Marine SEMI F47

Dimensions

63 x 125.2 x 113.5mm
Add to ClipbookAdd to Clipbook
Request a QuoteRequest a Quote

Features

  • Built-in active PFC function, PF>0.93
  • High efficiency 93% and low power dissipation
  • Short circuit, over load, over voltage, over temperature protections
  • Cooling by free air convection
  • Built-in constant current limiting circuit
  • Can be installed on DIN rail TS-35/7.5 or 15
  • UL 508(industrial control equipment)approved
  • EN61000-6-2(EN50082-2) industrial immunity level
  • Built-in DC OK Relay contact
  • 100% full load burn-in test
  • 150% peak load capability

General Specifications

Input Voltage Range 88 ~ 264Vac 124 ~ 370Vdc
Input Frequency 47 ~ 63Hz
Power Factor 0.92/230Vac 0.99/115Vac at full load
Efficiency 93%
Input Current 2.6A/115Vac 1.3A/230Vac
Inrush Current 31A/115Vac 62A/230Vac
Leakage Current <1mA/ 240Vac
Set Up, Rise Time 1500ms, 60ms/230VAC 3000ms, 60ms/115Vac at full load
Hold Up Time 20ms/230Vac at full load
Peak Output Power 360W (3sec.)
Over Load Protection Normally works within 110 ~ 150% rated output power for3 sec
and then shut down o/p voltage with auto-recovery
150 ~ 170% rated power or short circuit, constant current limiting within 3 sec
and then 88 ~ 132VAC : Shut down o/p voltage with auto-recovery. 180 ~ 264VAC :
Shut down o/p voltage, re-power on to recover
Over Voltage Protection Shut down o/p voltage with auto-recovery
ver Temperature Protection 95°C ±5°C (TSW : detect on heatsink of power switch)
Shut down o/p voltage, recovers automatically after temperature goes down
DC OK Relay Contact Ratings 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load
Working Temperature -25°C ~ +70°C (Refer to output load derating curve)
Working Humidity 20 ~ 95% RH non-condensing
Storage Temperature, Humidity -20°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient ±0.03%/°C (0 ~ 50°C)
Vibration Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes;
Mounting: Compliance to IEC60068-2-6
Withstand Voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25°C/ 70% RH
Safety Standards UL508, TUV EN60950-1 approved
EMC Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204, EN55024;
EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A;
SEMI F47 criteria A, GL approved
MTBF 169.3Khrs min. MIL-HDBK-217F (25°C)

SDR-240-48 Specifications

Part Number Voltage (max/rated)Current (amps)Power (watts)R&N (mV)Efficiency (%)
SDR-240-48 48V 5A 240W 120mV 93%

SDR-240-48 Specifications

Output Voltage Rated Current Current Range Rated Power Peak Current R&N Volt. Adj. Range Tol. Line Reg. Load Reg. OVP
48V 5A 0 ~ 5A 240W 7.5A 120mV48 ~ 55V ±1.0%±0.5% ±1.0%56 ~ 60V

Power Supplies with Programmable Output Voltage Function & PFC

The new SPV Series of single output enclosed power supplies increase the flexibility to users and their end systems. These full input range power supplies are available in 12V, 24V & 48V models and those output voltages are programmable from 20% to 120% by adding 1 - 6VDC external control. Other features of these programmable power supplies include wattage available up to 4500W, this range is ideal for the demands of high power applications.

Available Series are SPV-150 (150W), SPV-300 (300W), SPV-600 (600W) & SPV-1500 (1500W).

For our website dedicated to LED lighting designers and LED lighting purchasers visit PowerLED-uk.com

If you can't find what you are looking for, feel free to contact us +44 (0)845 533 1001 to discuss all your power supply needs.