General Specifications
| Input Voltage |
90 ~ 264Vac |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
0.75A/115Vac 0.48A/230Vac |
| Inrush Current |
60A/230Vac, cold start |
| Leakage Current |
0.25mA/240Vac |
| Current Adj. Range |
-25% ~ 3% |
| Voltage Tolerance |
±5.0% |
| Line Regulation |
±1.0% |
| Load Regulation |
±2.0% |
| Setup, Rise Time |
400ms,50ms/230Vac 800ms,50ms/115Vac at full load |
| Hold Up Time |
50ms/230Vac 16ms/115Vac at full load |
| Over Current Protection |
105 ~ 140% (95~110% ELN30-5) |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power to recover |
|
|
| Dimming Control (Optional) |
1 ~ 10Vdc or PWM |
| Working Temperature |
-20°C ~ +60°C (Refer to output load derating curve) |
|
|
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10~500Hz, 2G 10min./1 cycle, period for 60 min. each along X,Y,Z axes |
| Withstand Voltage |
I/P-O/P: 3KVAC |
| Isolation Resistance |
I/P-O/P: >100M Ohms/500VDC 25°C 70% RH |
| Safety Standards |
Design refers to UL1310 Class 2, TUV EN60950-1, CAN/CSAC22.2 No.223-M91 (except for 48V), |
|
EN61247-2-13; IP64 Approved |
| EMC |
EN55022 (CISPR22) Class B, EN61000-3-2,-3, |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, Light industry level, criteria A |
| MTBF |
628.3Khrs min. MIL-HDBK-217F (25°C) |
|
.jpg)
