DKA30C-15 - 30W 48V Input Dual 15V Output DC-DC Converter
Home > Products >DC-DC Converters > DKA30C Series 25W ~30W Dual Output Encapsulated DC-DC Converter > 30W 48V Input Dual 15V Output DC-DC Converter
|
Features- 2:1 wide input range
- 4:1 wide input range (optional)
- 1000VDC I/O isolation
- Input Pi network ilter
- Remote ON-OFF control
- Short circuit, over load protections
- Free air convection
- Six-sided shield metal case
- Epoxy encapsulated
- 100% burn-in test
Case Details
50.8 x 50.8 x 21.0mm
|
General Specifications
| Input Voltage |
36 ~ 72Vdc |
| Input Current |
0.77A full load, 10mA no load |
| Input Filter |
Pi network |
| Remote Control |
Power on: R.C ~-Vin > 4.5~5.5VDC or open, Power off R.C~ -Vin <0.8VDC or short |
| Ripple & Noise |
100mV |
| Line Regulation |
±0.5% |
| Load Regulation |
±0.5% |
| Voltage Accuracy |
±2% |
| Switching Frequency |
100Khz min. |
| External Trim Adj. Range |
±10% |
| Over Load Protection |
110~250% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Short Circuit Protection |
Hiccup mode, recovers automatically after fault condition is removed |
| Working Temperature |
-25°C~+85°C (Refer to output load derating curve) |
| Working Humidity |
20%~90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C~+105°C , 10~95% RH |
| Temperature Coefficient |
±0.03% /°C (0~50°C) |
| Vibration |
10~500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:1KVDC |
| Isolation Resistance |
I/P-O/P: 100M Ohms / 500VDC |
| MTBF |
100khrs min. MIL-HDBK-217F (25°C) |
|
DKA30C-15 Output Data
|
Voltage
|
Current Range
|
Rated Power
|
Eff.
|
|
+15V
|
100 ~ 1000mA
|
30W
|
81%
|
|
-15V
|
-100 ~ -1000mA
|
|
|
|
 (81KB)
|
| Add this product to your ClipBook |
.jpg)
