| Input Voltage |
85 ~ 264Vac 120 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230Vac PF>0.98/115Vac at full load |
| AC Current |
6.5A/115Vac 3.5A/230Vac |
| Inrush Current |
20A/115Vac 40A/230Vac |
| Leakage Current |
<2mA at 240Vac |
| Setup, Rise Time |
1000ms, 80ms/230Vac 2500ms, 80ms/115Vac at full load |
| Hold Time |
Typically 18ms/230Vac 18ms/115Vac at full load |
| Over Load Protection |
Constant current limiting, recovers automatically after condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection |
80°C (TSW1) Detect on heatsink of power transistor |
|
90°C (TSW2) Detect on heatsink of power diode |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| Remote Control |
RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off |
| Working Temperature |
-20 °C ~ +60°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +85°C, 10 ~ 95% RH |
| Temp. Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X,Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:Short |
| Isolation Resistance |
I/P-O/P, I/P-FG:100M Ohms/500VDC |
| Safety Standards |
UL60950-1,TUV EN60950-1Approved |
| EMC |
Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204; |
|
EN61000-4-2,3,4,5,6,8,11; EN61000-6-2 (EN50082-2) light industry level, criteria A |
| MTBF |
120.5K hrs min. MIL-HDBK-217F (25°C) |
.jpg)
