Custom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UKCustom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UK
Sunpower UK Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

Add this product to your ClipBook

BS-EN-ISO 9001:2000 certified BS-EN-ISO 9001:2000 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

80W Green Mode Single Output AC-DC Desktop Adapter

80W Green Mode Single Output AC-DC Desktop Adapter Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3...
All Products in Development

SD-500H-12 - 480W 72~144VDC I/P 12V 40A O/P DC-DC Converter

SD-500 Series 500W DC-DC Converter - SD-500H-12 - 480W 72~144VDC I/P 12V 40A O/P DC-DC Converter

Features

  • DC input active surge current limiting
  • Wide 4:1 ~ 2:1 DC input range 96V: 72~144VDC
  • Short circuit, over load, over voltage, over temperature, input polarity (by fuse) protections
  • 2000VAC I/O Isolation
  • Forced air cooling by built-in DC fan
  • Output OK Signal
  • Built-in remote ON-OFF control
  • Built-in remote sense function

Standards

CBCE

Case Details

215 x 115 x 50mm

General Specifications

Input Voltage 72 ~ 144VDC
Input Current 6A/96VDC
Input Current at No Load 0.1A/96VDC
Inrush Current 60A/96VDC
Set Up, Rise Time 500ms, 50ms at full load
Over Load Protection 105 ~ 125% rated output power
Constant current limiting shutdown o/p voltage, after about 5 sec., re-power on to recover
Over Voltage Protection Shut down o/p voltage, re-power on to recover
Over Temperature Protection 85°C ±10°C (TSW2) detect on heatsink of O/P diode;
80°C ±5°C(TSW1)detect on heatsink of power transistor
Shut down o/p voltage, recovers automatically after temperature goes down
Remote On/Off Control Please refer to pdf
Output OK Signal Open collector signal low when PSU turns on, Max sink current: 10mA
Working Temperature -20°C ~ +60°C (Refer to output load derating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temperature, Humidity -40°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient ±0.02%/°C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
Withstand Voltage I/P-O/P:2KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25°C 70% RH
Safety Standards IEC60950-1 CB approved by TUV
EMC Compliance to EN55022 (CISPR22) Class B;
EN61000-4-2,3,4,6,8; ENV50204, light industry level, criteria A
MTBF 196.3K hrs min. MIL-HDBK-217 (25°C)

SD-500H-12 Output Data

Voltage Rated Current Current Range Rated Pwr R&N Volt. Adj. Tol. Line Reg. Load Reg. Eff. OVP
12V 40A 0 ~ 40A 480W 150mV 11 ~ 15V ±1.0% ±0.5% ±0.5% 86% 16 ~ 19V
Download PDF document
Add this product to your ClipBook

 

 
© Copyright 2008  Sunpower UK - Custom Power Supplies - Bespoke Power Supply - Power Supply Supplier

Sunpower UK is one of the UK's leading suppliers of power supplies, custom power supply and bespoke power supplies. Our range of power supplies covers a range of applications and industries including laboratory power supplies, medical grade power supplies, data storage power supplies and Epos power supplies.

Our highly experienced professionals can advise on all aspects of custom power supplies for business and industry applications, offering a first class friendly service from point of contact through to completion of purchase and after sales service.