Custom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UKCustom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UK
Sunpower UK Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

Add this product to your ClipBook

BS-EN-ISO 9001:2000 certified BS-EN-ISO 9001:2000 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

80W Green Mode Single Output AC-DC Desktop Adapter

80W Green Mode Single Output AC-DC Desktop Adapter Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3...
All Products in Development

GC30B-0P1J - 16.8W 4.2V 4A Lithium ion Battery Charger

GC30B Desktop Charger - GC30B-0P1J - 16.8W 4.2V 4A Lithium ion Battery Charger

Features

  • Universal AC input
  • 2 pole AC Inlet IEC320-C8
  • Class II power (without earth pin)
  • No load power consumption <1.0W
  • Constant current and voltage(CC,CV mode)
  • Suitable for continuous load
  • For high surge current equipment
  • Short circuit, over load, over voltage & over temperature protectiond
  • 2 colors LED indication for charging status
  • Fully enclosed plastic case
  • High reliability

Standards

TRIGSCULCBCE
Energy Saving Low No Load Power Consumption

Case Details

108 x 67 x 36mm

General Specifications

Input Voltage 90 ~ 264Vac 127 ~ 370Vdc
Input Frequency 47 ~ 63Hz
Input Current 1A/ 100Vac
Inrush Current 40A/ 230Vac
Leakage Current 0.25mA/ 240Vac
LED Indicator Green LED ON : <200mA Red LED ON : >200mA of charge current
Set Up, Rise, Hold Time 200ms, 50ms, 16ms at full load
Over Load Protection 90 ~ 110% Constant current mode and over 300% pulsing mode
Constant current limiting, recovers automatically after fault condition is removed
Over Voltage Protection 110 ~ 135% rated output voltage
Clamp by zener diode
Over Temperature Protection IC1Tj130°C
Shut down o/p voltage, recovers automatically after temperature goes down
Working Temperature 0°C to +50°C (Refer to output load derating curve)
Working Humidity 20% ~ 90% RH non-condensing
Storage Temperature, Humidity -20°C to +85°C, 10 ~ 95% RH
Temperature Coefficient ±0.03%/°C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, period for 60min.each along X,Y, Z axes
Withstand Voltage I/P-O/P:3KVAC
Isolation Resistance I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH
Safety Standards UL60950-1, CSA22.2, EN60950-1 Approved
EMC Compliance to EN55014-1 class B, FCC part 15 Class B, EN61000-3-2,3,
EN61000-4-2,3,4,5,6,11, Light industry level, criteria A
DC Plug 2.1 x 5.5 x 11mm centre positive tuning fork connector
DC Cable 18AWG UL1185 6ft and 4ft for 4.2~8.4V output only

GC30B-0P1J Output Data

DC Volt Set At Rated Current Current Range Rated Pwr R&N Charging Volt. Rng. Line Reg. Eff.
4.2V 4A 0 ~ 4A 16.8W 50mV 3.6 ~ 4.4V ±1.0% 55%
Download PDF document
Add this product to your ClipBook

 

 
© Copyright 2008  Sunpower UK - Custom Power Supplies - Bespoke Power Supply - Power Supply Supplier

Sunpower UK is one of the UK's leading suppliers of power supplies, custom power supply and bespoke power supplies. Our range of power supplies covers a range of applications and industries including laboratory power supplies, medical grade power supplies, data storage power supplies and Epos power supplies.

Our highly experienced professionals can advise on all aspects of custom power supplies for business and industry applications, offering a first class friendly service from point of contact through to completion of purchase and after sales service.