Custom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UKCustom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UK
Sunpower UK Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

Add this product to your ClipBook

BS-EN-ISO 9001:2000 certified BS-EN-ISO 9001:2000 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

80W Green Mode Single Output AC-DC Desktop Adapter

80W Green Mode Single Output AC-DC Desktop Adapter Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3...
All Products in Development

MPD-120B - 120W Dual Output Open Frame Medical Power Supply

Product Image - MPD-120B - 120W Dual Output Open Frame Medical Power Supply

Features

  • Universal AC input / Full range
  • Low leakage current <180µA
  • Protections:Short circuit/Over load/Over voltage
  • UL60601-1 medical safety approved
  • With power good and fail signal output (Optional)
  • 100% full load burn-in test
  • Fixed switching frequency at 45KHz

Standards

CBCECSUUSMEDICALTUVMedical

Case Details

177.8 x 107.95 x 35.5mm

General Specifications

AC input voltage 90~264 VAC, 47~440Hz / 127~370VDC
AC input current Maximum input current 2.9A at 115VAC, 60Hz or 1.7A at 230VAC, 60Hz with 100% output load.
Inrush current Less than 22A at 115VAC or 45A at 230VAC at cold start conditions
Setup, rise time 500ms, 20ms / 230VAC at full load, 1200ms, 50ms / 115VAC at full load
Hold-up tiime 80ms / 230VAC at full load,14ms / 115VAC at full load
Leakage current Leakage current is less than 180µA at 264VAC
DC output adj. range Between -5%~+10% rated output voltage
Over load protection Will be activated at 110~150% rated load.
Over voltage protection 115% ~ 135% rated output voltage
Power good/Fail signal (optional) At 90% of rated value, a+5V TTL signal will be sent out with a 10~500ms delay; at least
1ms before the output voltage goes below 90% of the rated value,the TTL signal will be turned off.
Working temp. operate from -20~70°C .
Workinig humidity 20~90% RH non-condensing.
Storage temp., humidity -40~+85 °C, 10~90% RH
Temp. coefficient ±0.04%/°C on all outputs at full load between 0~50°C of ambient temperature.
Vibration 2G of acceleration,vibrating frequency adjust from 10Hz ~500Hz within a 10 min cycles
Safety standards Medical:UL60601-1, TUV EN60601-1 approved
Commercial: Also design refer to UL60950-1, TUV EN60950-1
Withstand voltage 4000VAC between input and output,1500VAC between input and F.G.,500VAC between output and F.G.
Isolation resistance >100M Ohms for I/P-O/P, I/P-FG, O/P-FG by using 500VDC test voltage.
EMI compliance Compliance Level EN55011, Class B,EN55022, Class B,EN61000-3-2,EN61000-3-3
EMS compliance Compliance Level EN61000-4-2,Level 3, 8KV,EN61000-4-2 Level 2, 4KV
EN61000-4-3 Level 2, 3V/m,Level 3, 10V/m,EN61000-4-4 Level 2, 1KV/5KHz,Level 3, 2KV/5KHz
EN61000-4-5,Level 4, 2KV/Line-Line 4KV/Line-Earth,EN61000-4-6 Level 2, 3Vrms/m,Level 3, 10Vrms/m
EN61000-4-8,Level 2, 3A/m,Level 3, 10A/m,EN61000-4-11 Compliance
ENV50204,Level 2, 3V/m, 900MHz,Level 3, 10A/m, 900MHz
MTBF 262,100 hours min at full load and 25°C of ambient temperature.

Output Data

Output Voltage Rated Current Min load Output Current Convection Output Current With Fan Output Current Peak Load With 25CFM Fan Ripple & Noise Voltage Tolerance Line reg. Load reg. Efficiency
5V 10A 2A 7A 10A 12A 80mVp-p ±2.0% ±0.5% ±0.5% 76%
24V 2.9A 0.3A 1.9A 2.9A 3.2A 250mVp-p ±8.0% ±2.0% ±4.0% 76%
Download PDF document
Add this product to your ClipBook

 

 
© Copyright 2008  Sunpower UK - Custom Power Supplies - Bespoke Power Supply - Power Supply Supplier

Sunpower UK is one of the UK's leading suppliers of power supplies, custom power supply and bespoke power supplies. Our range of power supplies covers a range of applications and industries including laboratory power supplies, medical grade power supplies, data storage power supplies and Epos power supplies.

Our highly experienced professionals can advise on all aspects of custom power supplies for business and industry applications, offering a first class friendly service from point of contact through to completion of purchase and after sales service.