Custom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UKCustom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UK
Sunpower UK Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

Add this product to your ClipBook

BS-EN-ISO 9001:2000 certified BS-EN-ISO 9001:2000 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

80W Green Mode Single Output AC-DC Desktop Adapter

80W Green Mode Single Output AC-DC Desktop Adapter Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3...
All Products in Development

MPS-200-3-3 - 200W 3.3V 40A Medical Open Frame Power Supply

Product Image - MPS-200-3-3 - 200W 3.3V 40A Medical Open Frame Power Supply

Features

  • Universal AC input / Full range
  • Built-in active PFC, PF>0.95@230VAC
  • Low leakage current <180µA
  • Free air convection for 140W and forced air convection for 200W
  • Power good and fail signal output
  • Built-in remote ON-OFF control & remote sense function
  • Fixed switching frequency at 100KHz
  • Compliance to UL2601-1 & TUV EN60601-1 medical standards

Standards

TUVMedicalMEDICALPFCCBCSUUSCE

Case Details

177.8 x 107.2 x 35.5mm

General Specifications

Input Voltage 90~264 VAC, 47~440Hz / 127~370VDC.
Power Factor PF>0.95/230VAC PF>0.98/115VAC, full load
AC Input Current 3.5A at 115VAC, 60Hz or 1.6A at 230VAC, 60Hz full load.
Inrush Current <25A at 115VAC or <40A at 230VAC Cold start
Setup, Rise Time 1000ms, 20ms / 230VAC at full load , 3000ms, 20ms / 115VAC at full load
Hold-Up Time 16ms / 230VAC at full load, 16ms / 115VAC at full load
Leakage Current <180µA at 264VAC for earth leakage
<100µA at 264VAC for patient leakage
DC Output ADJ Range -5% to +10% rated output, on first output
Over Load Protection 120~160% rated load
Auto recovery once fault condition removed
Over Voltage Protection 115%~135% rated load, on first output
Over Temperature Protection At 95°C. Will shut down and recover automatically after temperature goes down.
Power Good/Fail Signal TTL logic high for power good and TTL low for power fail.
Remote Control RC+/RC-:0 ~ 0.8V=power on; 4 ~ 10V=power off sink current<4~10mA
Working Temperature -20°C to 70°C (refer to derating curve)
Working Humidity 20~90% RH non-condensing.
Storage Temp , Humidity -40°C to +85°C, 10~90% RH
Temperature Coefficient ±0.04%/°C (0~50°C) full load
Vibration 2G 10Hz ~500Hz 10 min cycle.
Medical Safety Standards UL60601-1, TUV EN60601-1 approved
Commercial Safety Standards Complies with UL60950-1, TUV EN60950-1
Withstand Voltage I/P-O/P: 4000VAC I/P-FG, O/P-FG: 1500VAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG : >100M Ohms
EMI Compliance to EN55011 Class B, EN55022 Class B, EN61000-3-2, EN61000-3-3
EMS Compliance to EN61000-4-2 Level 3, 8KV, EN61000-4-2 Level 2, 4KV
EN61000-4-3 Level 2, 3V/m , EN61000-4-3 Level 3, 10V/m,
EN61000-4-4 Level 2, 1KV/5KHz, EN61000-4-4 Level 3, 2KV/5KHz
EN61000-4-5 Level 4, 2KV/Line-Line, 4KV/Line-Earth,
EN61000-4-6 Level 2, 3Vrms/m, Level 3, 10Vrms/m
EN61000-4-8 Level 2, 3A/m, EN61000-4-8 Level 3, 10A/m, EN61000-4-11 Compliance
ENV50204 Level 2, 3V/m, 900MHz, ENV50204 Level 3, 10A/m, 900MHz
MTBF 262,100 hours min MIL-HDBK-217F

MPS-200-3.3 Output Data

Output Voltage Rated Current Minimum Load Current Convection Current with Fan 25CFM Peak Load with 25CFM Fan R&N Tol. Line Reg. Load Reg. Eff.
3.3V 40A 0A 28A 40A 48A 80mV ±2.0% ±0.5% ±1.0% 77%
Download PDF document  (522KB)
Add this product to your ClipBook

Related Documents

 

 
© Copyright 2008  Sunpower UK - Custom Power Supplies - Bespoke Power Supply - Power Supply Supplier

Sunpower UK is one of the UK's leading suppliers of power supplies, custom power supply and bespoke power supplies. Our range of power supplies covers a range of applications and industries including laboratory power supplies, medical grade power supplies, data storage power supplies and Epos power supplies.

Our highly experienced professionals can advise on all aspects of custom power supplies for business and industry applications, offering a first class friendly service from point of contact through to completion of purchase and after sales service.