	Sunpower (UK) Ltd, Orion House, Calleva Park, Aldermaston, Berkshire, RG7 8SN. Tel: +44 (0)118 981 1001 Fax: +44 (0)118 981 2002 Web: www.sunpower-uk.com

MS-75 - MS-75 75W Single Output Module

Standards

Dimensions

254 x 127 x 63.5mm

Request a Quote

Download Range Datasheet

Add to Clipbook

Features

Universal input voltage
Uses ZVS technology to reduce power dissipation and improve efficiency
Large range of output configurations available
Remote control on each module
Remote sense on MS-75, 150 & 300 modules
Built in active PFC, PF>0.95
Built in parallel function on MS-300
Fan alarm function
Forced air cooling

General Specifications

Input Voltage	86 to 264Vac or 120 to 370Vdc
Input Frequency	47 to 63Hz
Input Current	9A at 115Vac; 4.5A at 230Vac
Inrush Current	30A at 115Vac; 50A at 230Vac, cold start
Power Factor Correction	>0.95 at 230Vac; >0.98 at 115Vac; full load
Efficiency	85% typically
Leakage Current	<1.5mA at 240Vac
Output Power	650W maximum
Setup, Rise, Hold-Up Time	1500ms, 50ms, 20ms at full load
Over Load Protection	Constant Current limiting, recovers automatically once fault condition removed
Over Temperature Protection	Thermal switch detect on the heatsink of power MOSFET
	Should the power supply reach excessive temperatures it shall shut down
	and auto recover once temperature returns to operable levels
Fan Fail	The outputs shall shut down should the fan malfunction
Remote Control	RC+/RC-: 0 to 0.8V or Short, Power on
	RC+/RC-: 4 to 12V or Open, Power Off
Remote Inhibit Control	RC+/RC-:0V~0.8V or OPEN, POWER ON
	RC+/RC-:4V~12V or OPEN, POWER OFF
Auxiliary Power	12V at 0.1A (only for remote on/off)
Withstand Voltage	I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, 1 minute
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100MW/500Vdc
Operating Temperature	-20°C to +70°C (refer to de-rating curve)
Operating Humidity	20% to 90% RH Non-condensing
Storage Temperature, Humidity	-40°C to +85°C, 10% to 95% RH
Temperature Coefficient	±0.03%/°C (0°C to 50°C)
Vibration	10 to 500Hz, 2G 10min./1 cycle, 60 min. each along X, Y, Z axes
Safety Standards	UL60950-1, TUV EN60950-1, EN60601-1 approved
EMC	Complies to EN55022 Class B, EN6100-3, -2,3, EN61000-4-2,3,4,5,6,8,11,
	ENV50204, EN55024, EN61000-6-1, EN61204-3 Light Industrial Level, Criteria A

75W Modules

Item Code	DC Voltage	Rated Current	Peak Load	Rated Power	R&N	Volt Adj. Rnage	Tol.	Line Reg.	Load Reg.	OVP	Over Load
L	3.3V	15A	17.3A	49.5W	80mV	2.6V~4V	±2.0%	±0.5%	±1.0%	4.1V~5.0V	116~150%
M	5V	15A	17.3A	75W	80mV	4V~6V	±2.0%	±0.5%	±1.0%	6.1V~7.5V	116~150%
N	12V	6.3A	7.3A	75.6W	150mV	9V~13.2V	±1.0%	±0.3%	±0.5%	13.3V~18V	116~150%
O	15V	5A	5.8A	75W	150mV	13.2V~16.8V	±1.0%	±0.3%	±0.5%	16.9V~22V	116~150%
P	24V	3.2A	3.7A	76.8W	150mV	20V~26.4V	±1.0%	±0.2%	±0.5%	26.5V~35V	116~150%
Q	48V	1.6A	1.8A	76.8W	250mV	40V~53V	±1.0%	±0.2%	±0.5%	53.1V~60V	116~150%

Power Supplies with Programmable Output Voltage Function & PFC

The new SPV Series of single output enclosed power supplies increase the flexibility to users and their end systems. These full input range power supplies are available in 12V, 24V & 48V models and those output voltages are programmable from 20% to 120% by adding 1 - 6VDC external control. Other features of these programmable power supplies include wattage available up to 4500W, this range is ideal for the demands of high power applications.

For our website dedicated to LED lighting designers and LED lighting purchasers visit PowerLED-uk.com

If you can't find what you are looking for, feel free to contact us +44 (0)845 533 1001 to discuss all your power supply needs.

Medical ATX Power Supply with UPS Function

75W DC-DC Half Brick Regulated Single Output Converter

High Power LED Moving Sign Power Supplies