Products

We provide Regulated Linear, Unregulated Linear and switched mode adapters offering AC/AC or AC/DC mains power and single fixed voltage, selectable voltage or variable outputs starting at 3.3V through to 48V. Mains wall mount adapter, plug-top, desktop and bench styles are available.

Suitable applications include digital photography, security, POS, telecommunications, broadcasting, IT equipment, general electronics and many more.

A range of battery chargers for Sealed Lead Acid batteries offering a range of functions including over charge protection, trickle charging, 3 stage charging and automated derating capabilities; suitable for charging vehicles ranging from motor cycles to trucks, marine applications, leisure vehicles such as caravans and household appliances. Note: The maximum Ah specified on these units is based on a 12Hr charging time for a fully discharged battery.

We offer a range of high quality and reliable PC power supplies starting at 200W through to 750W. Form factors include Micro ATX, ATX 12V, SFX, IPC, EPS, SLI, Flex. Standard features include full protections, remote on/off control, power factor correction, low noise, super quiet operation, high efficiency, 80 Plus verification, The majority of our PC PSU’s are designed for compatibility with either SSI, Intel P4 or AMD Athlon. Typical applications include workstations, server systems & POS.

Pure Sine Wave Power inverters capable of driving highly reactive and capacitive loads from start up and intelligent 3 stage leisure battery chargers, for use as your main power source or as a back up system on marine and leisure applications.

Other applications include Wheelchair/golf cart charger, Motor cycle charger, caravan charger, car battery charger and solar trickle charger for car battery.

Starting at 15 Watts through to 2400 Watts our enclosed product ranges offer a versatile power source to your application standard features including Modular Power, Parallel Operation, UPS function (external battery required) and PFC these units are the perfect front end power supply.

A range of DC/DC converters starting at 10 Watts through to 350 Watts available as Encapsulated Modules, On Board type, General PCB and Enclosed styles.

Suitable for use in general electrical engineering, automotive, security, Battery back up systems and transportation applications

DC/AC Power inverters, modified sine wave, true sine wave DC/AC inverters.

Used to power home appliances, power tools and office and portable equipment. Also suitable for use in a wide range of vehicle and marine applications.

Chargers for NiCD and NiMH battery packs often used for hobby toys, radio controlled cars, aircrafts and ships. Pair with our Multiadaptor and you can also use to charge the battery pack for your cordless phones, camcorder and mobile phone.

Our range of open frame power supplies include single, dual, triple and quad outputs and now start as low as 5W through to 200W. Available in a variety of formats such as surface mount and on board type they include features such as full protections, high efficiency, low R&N, and free air convection cooling. Suitable applications include factory automation, telecommunications, networking, medical, test & measurement, POS systems and general electronics.

Encapsulated and open frame PCB Mount AC DC power supplies and DC DC converters, designed to fit onto your systems PCB board to save space and allow for low profile applications. With standard features that include no load power consumption, full protections, class II isolation and free air convection cooling. These products are also referred to as on board power supplies, surface mount power modules, DC-DC Converters & AC-DC power modules.

Our Din Rail power supplies are a fanless design for installation on TS35/7.5 or TS35/15 industrial rails available as a slim line 20 Watt unit through to our three phase 960 Watt unit.

Known uses include general Industrial applications including factory automation, electro-mechanical industry, Data communications, IT, power distribution boxes, control panels, building automation and household appliance control.

DC-DC PC power supplies

PS2, 1U, 2U, EPS, AT & ATX form factors

Hot swappable modules with caddies are easy to install, with zero transfer time. Many feature active current sharing outputs, remote sense, alarms & TTL signal ontop of standard features such as over load, over voltage and short cirsuit protection. Available as 19", 1U, 2U, mini redundant, Raid, AT, ATX, N+1 and redundant.

Our medical products are available as General PCB, desktop and on board types starting at 5 Watts through to 200 Watts. Designed with low leakage current or low no load power consumption, full protections and compliance to medical safety standards these units are very versatile.

Suitable for non patient contact medical applications and other non medical related applications such as IT equipment, general electronics.

UK, European and USA power cords in multiple configurations. Our plugs include Shuko, 3pin USA, 2 pin flat Euro & 2 pin flat USA, and non-rewireable UK. The sockets on our Mains leads include IEC320 C5 “Mickey Mouse” style, C7 figure of eight & C13 kettle with right angled C13’s and stripped and tinned ends also available.

A selection of din rail and mounting accessories including brackets and plates intended for use with enclosed products to fix them into your enclosure. Also includes Parallel Connection and Series Connection accessories for our modular power series.