PSD-05-05 - 5W 5V 1A DC-DC Converter
Home > Products >DC-DC Converters > PSD-05 Series 5W Single Output DC-DC Converter > 5W 5V 1A DC-DC Converter
|
Features- 2:1 wide input range
- 2000VDC I/O isolation
- Short circuit, Overload, Over voltage, Over temperature protection
- Built-in EMI filter, low ripple noise
- 100% full load burn-in test
- Fix switching frequency at 67KHz
- Cooling by free air convection
Standards
Case Details
75 x 40 x 20mm
|
General Specifications
| Voltage Range |
36 ~ 72VDC |
| DC Current (typ.) |
0.15A/48V |
| Setup, Rise, Hold Up Time |
1.2s, 20ms at full load |
| Over Load Protection |
Above 105% rated output power |
|
Fold back current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Hiccup mode, recovers automatically after fault condition is removed |
| Over Temperature Protection |
U1 Tj140 typically (U1)Detect on main control IC |
|
Hiccup mode, recovers automatically after temperature goes down |
| Working Temperature |
-10°C to +60°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temp., Humidity |
-20°C to +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.05%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, Period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P: 2KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| EMC |
Compliance to EN55022 (CISPR22) Class B |
|
EN61000-4-2,3,4,6,8, ENV50204, EN55024, EN61000-6-1 LIght industry level, criteria A |
| Dimensions |
75 x 40 x 20mm |
|
PSD-05-05 Output Data
|
DC Voltage
|
Rated Current
|
Current Range
|
Rated Power
|
R&N (max)
|
Tol.
|
Line Reg.
|
Load Reg.
|
Eff. (typ.)
|
OVP
|
|
5V
|
1A
|
0 ~ 1A
|
5W
|
50mV
|
±2.0%
|
±1.0%
|
±1.0%
|
75%
|
5.75 ~ 6.75V
|
|
 |
| Add this product to your ClipBook |
.jpg)
