SAP-6425 - 425W Active PFC ATX Power Supply
Home > Products >PC Power > SAP-6425 425W Active PFC ATX Power Supply > 425W Active PFC ATX Power Supply
.jpg)
|
Features- Meet Intel ATX 2.01 / ATX2.03 / ATX 12V
- +3.3V, +5V main output remote sensing
- Built in EMI filter. low ripple noise
- Built-in long life ball bearing fan
- Over load, over voltage & short circuit protection
- 100% 50°C burn-in test
- Meet EMC EN 55022, EN 55024 standard
- UL, cUL, CB, CE approved
Standards
   
Case Details
150 x 140 x 86mm
|
General Specifications
| Input voltage |
90 ~ 132 V AC@115V, 180 ~ 264 VAC@230V, selected by switch |
| Input frequency |
47Hz-63Hz |
| Input current |
<8.0A @ 115V AC input, 4.5A @ 230V AC input |
| Inrush current |
<80A@115V / <120A@230V AC input. |
| Leakage Current |
<1.5mA@264V AC input |
| Max Power |
+3.3V & +5V max. 250W, -5V & -12V max. 12W, Total output max 425W |
| Overload protection |
Over 105% ~ 150% of rating, shutdown & latch |
| Short circuit protection |
Shut down & latch. |
| Rise time |
<20mS |
| Hold up time |
>20mS@230V |
| TTL signal |
Power Good Signal, PS-ON Input Signal |
| Cooling |
Built-in a 31 CFM DC fan. |
| Temperature |
Operating: -10~70°C; De-rating: 50°C ~70°C :2.5%/°C. Storage: -10~+75°C |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F |
150K hours |
| Safety standard |
UL1950 3rd, CSA C22.2 No.950, IEC 60950, EMKO-TSE (74-SEC)207/94 approved. |
| EMI Standards |
EN 55022 CLASS B , FCC CFR 47 PART 15 CLASS B, CNS 13438 CLASS B. |
| EMS Standards |
EN 55024 : EN 61000-4-2,3,4,5,6,8,11. |
|
Output Data
|
Voltage
|
Min. Load
|
Max. Load
|
Regulation
|
Ripple Noise (max)
|
Efficiency (TYP)
|
OVP
|
|
+3.3V
|
0.5A
|
30A
|
±5%
|
50mV
|
65%
|
|
|
+5V
|
3A
|
45A
|
±5%
|
50mV
|
65%
|
+5.8V~+7.0V
|
|
+12V
|
1A
|
18A
|
±5%
|
120mV
|
65%
|
|
|
-5V
|
0A
|
0.5A
|
±10%
|
100mV
|
65%
|
|
|
-12V
|
0A
|
1A
|
±10%
|
240mV
|
65%
|
|
|
+5Vsb
|
0A
|
2A
|
±5%
|
50mV
|
65%
|
|
|
 |
| Add this product to your ClipBook |
.jpg)
