SD-15A-12 - 15W 9.2~18VDC I/P 12V 1.25A O/P DC-DC Converter
Home > Products >DC-DC Converters > SD-15A Series 15W 9.2~18VDC Input Single Output DC-DC Converter > 15W 9.2~18VDC I/P 12V 1.25A O/P DC-DC Converter
.jpg)
|
Features- 2:1 wide input range
- Short circuit/Over load/Over voltage protection
- 3000VDC I/O isolation
- Cooling by free air convection
- Built in EMI filter, low ripple noise
- 100% full load burn-in test
- Fixed switching frequency at 83KHz
- Miniture profile
Standards
Case Details
79 x 51 x 28mm
|
General Specifications
| Input Voltage Range |
9.2~18VDC |
| Input DC Current |
1.9A/12VDC typically |
| Setup, Rise, Holdup Time |
2.5s, 25ms on 12VDC & 24VDC o/p at full load |
| Over Load Protection |
105% ~ 160% rated output power |
|
Hiccup mode , recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recovertì |
| Working Temperature |
-10~+60°C (refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temp., Humidity |
-20 ~+85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03% /°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, 60 min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.8KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| Safety Standards |
Design refer to LVD |
| EMS Standards |
Compliance to EN55022 (CISPR22) Class B, EN61000-4-2,3,4,6,8; |
|
ENV50204, EN55024, light industry level, Criteria A |
| Dimensions |
79 x 51 x 28mm |
|
SD-15A-12 Output Data
|
Part Code
|
DC Voltage
|
Rated Current
|
Current Range
|
Rated Power
|
R & N (max)
|
|
SD-15A-12
|
12V
|
1.25A
|
0 ~ 1.25A
|
15W
|
120mV
|
|
|
|
|
|
|
|
|
Volt Adj.
|
Tol.
|
Line Reg.
|
Load Reg.
|
Eff.
|
OVP
|
|
10.8~13.2VDC
|
±1.0%
|
±0.3%
|
±0.3%
|
72%
|
13.8~16.2V
|
|
 |
| Add this product to your ClipBook |
.jpg)
