SE-600-48 - SE-600-48
Home > Products >Enclosed > SE-600 Series 600W Single Output AC-DC Enclosed Power Supply > SE-600-48
|
Features- High power density 4.9w/in
- AC input active surge current limiting
- AC input range selected by switch
- Protections:Short circuit/Over load/Over voltage/Over temperature
- Forced air cooling by built-in DC fan
- Built-in remote sense function
- UL approved
- Low cost
Standards
Case Details
247*127*63.5mm (L*W*H)
|
General Specifications
| SETUP, RISE, HOLD TIME |
1000ms, 50ms, 16ms/230VAC 1000ms, 50ms, 14ms/115VAC at full load |
| VOLTAGE RANGE |
90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 370VDC |
| FREQUENCY RANGE |
47~63Hz |
| AC CURRENT |
12A/115VAC 7.5A/230VAC |
| INRUSH CURRENT (max. |
30A/115VAC 50A/230VAC |
| LEAKAGE CURRENT |
<2.0mA / 240VAC |
| OVER LOAD |
105 ~ 125% rated output power Protection type : Shut down o/p voltage, re-power on to recover |
| OVER VOLTAGE |
Protection type : Shut down o/p voltage, re-power on to recover |
| OVER TEMPERATURE |
85°C ?5°C (TSW1) Detect on heatsink of power transistor Protection type : Shut down o/p voltage, rec |
| WORKING TEMP. |
-20 ~ +60°C (Refer to output load derating curve) |
| WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY |
-40 ~ +85°C , 10 ~ 95% RH |
| TEMP. COEFFICIENT |
?0.05%/°C (0 ~ 50°C ) |
| VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| SAFETY STANDARDS |
UL60950 Approved |
| WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| MTBF |
197K hrs min. MIL-HDBK-217F (25°C) |
|
 |
| Add this product to your ClipBook |
.jpg)
