| Input voltage |
90 ~ 264VAC |
| Input Frequency |
47 ~ 63Hz |
| Power factor |
>0.95 at 230VAC
>0.98 at 115VAC, full load |
| Input current |
11A at 115VAC
5.3A at 230VAC |
| Inrush current |
30A at 115VAC 50A at 230VAC |
| Leakage current |
<2.0mA at 240VAC |
| Setup, rise, hold-up time |
600ms, 50ms, 16ms at 230VAC
600ms, 50ms, 16ms at 115VAC and full load |
| Overload protection |
105~125% rated output power. Constant current limiting, unit will Hiccup after 3 sec. |
| Over voltage protection |
Protection type: auto shutdown, turn off then on to recover |
| Over temperature protection |
85?C ?5?C (TSW1) Detect on heatsink of power transistor
85?C ?5?C (TSW2) Detect on heatsink of pow |
| Power good/fail |
50ms/1ms |
| Remote control |
RC+/RC- short power on, open power off |
| Operating temperature |
-20?C to +60?C (Refer to output load derating curve) |
| Operating humidity |
20% to 90% RH non-condensing |
| Storage temperature, humidity |
-40?C to +85?C,
10 ~ 95% RH |
| Temperature coefficient |
?0.05%/?C
(0?C to 50?C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand voltage |
I/P-O/P:3KVAC
I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| Safety standards |
UL60950-1,
TUV EN60950-1 Approved |
| EMC |
Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,1 |
| MTBF |
769.3K hrs min. MIL-HDBK-217F (25?C) |
.jpg)
