SPR-2480P2 - SPR-2480P2
Home > Products >Hot Swap > SPR-2480P2 480+480W 2U RAID Active PFC Mini Redundant Hot Swa > SPR-2480P2
|
|
Features- Universal full range with active P.F.C. function
- Hot swap, easy to install, zero transfer time
- +5V main output remote sensing
- Power fail, fan fail alarm and TTL signal
- Remote control power on/off
- Over load, over voltage & short circuit protection
- System over temperature detecting function
- Or-in diode built inside module
- Built in EMI filter, low ripple noise
- Built-in long life ball bearing fan
- 100% 50℃ burn-in test.
- Meet Intel ATX 2.01 / 2.03 / ATX 12V
Standards
 
Case Details
106 x 314 x 83 mm
|
General Specifications
| Input Voltage |
90V ~ 264V universal full range |
| Input Frequency |
47 ~ 63 Hz |
| Input Current |
<7.8A@100VAC full load condition. |
| Inrush Current |
<50A@115VAC, <100A@230VAC full load condition. Cold start at 25?C ambient |
| Power Factor |
Meet IEC 1000-3-2 class D, P.F.>0.95 |
| Over Load Protection |
Over 105% ~ 150% of rated load, shutdown. Auto recovery when fault condition be removed |
| Over Voltage Protection |
+3.3V: +3.8V~+4.6V; +5V: +5.8V~+7.0V; +12V: +13.8V~+17.5V |
| Rise time |
<20mS |
| Hold up time |
>20mS@230V |
| TTL Signal |
Power good signal; PS-ON signal |
| Alarm |
Power fail alarm, fan fail alarm, over temperature alarm |
| Cooling |
DC ball bearing Fan in each module |
| Temperature |
Operating: 0~70?C; derating: 45?C~70?C : 2.5%/?C. Storage: -10~+75?C |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F. |
89K hours |
| Safety |
UL 60950, CSA C22.2 No.60950, TUV EN 60950, IEC 60950, EMKO-TSE (74-SEC)207/94 Standard |
| EMC |
FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CALSS B, EN 50082-1 (1997) |
|
 |
| Add this product to your ClipBook |
.jpg)
