SPU-100-D1 - 100W Dual Output U-Bracket Power Supply
Home > Products >Enclosed Power Supplies > SPU-100-D Series 100W Dual Output U-Bracket Power Supply > 100W Dual Output U-Bracket Power Supply
.jpg)
|
Features- Universal AC input
- Built in EMI filter
- 100% 50° burn-in test
- Low ripple noise
- High efficiency
- Overload, over voltage & short circuit protection
- Approvals: UL/cUL/TUV/CE/CB
Standards
   
Case Details
133.54x 84 x 38mm
|
General Specifications
| AC input |
90~264VAC |
| Input frequency |
47-63Hz |
| Input current |
3.0A max. @ 115VAC full load |
| Inrush current |
Cold start, 30A/115VAC, 60A/230VAC |
| Leakage Current |
<1mA@264V AC input |
| Over load protection |
105%-150% of 100W |
| Short circuit protection |
Outputs shutdown when shorted to ground |
| Rise time |
100mS maximum |
| Hold up time |
20mS/230VAC |
| Cooling |
Natural cooling, when output exceed 80W a 16 CFM(min) DC fan is required. |
| Temperature |
Operating: -10~70°C; De-rating: 40°C ~70°C : 2.5%/°C. Storage: -10~+75°C |
| Humidity |
Opertaing: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F. |
267K hours |
| Safety standard |
UL 1950, CSA C22.2 No.950-95, TUV EN 1950, IEC 60950, EMKO-TSE (74-SEC) 207/94 approved |
| EMI |
EN 55022 Class B, FCC Part 15 ClassB, EN 50082-1, CNS 13438 Class B |
| EMS |
EN 55024 : EN 61000-4-2,3,4,5,6,8,11. |
|
SPU-100-D1
|
Voltage
|
Min. Load
|
Max. Load
|
Regulation
|
Ripple Noise (MAX)
|
Efficiency (MIN)
|
Over Voltage Protection
|
|
+5V
|
2A
|
20A
|
±3%
|
50mV
|
74%
|
5.8 ~ 7.0V
|
|
+12V
|
0A
|
2.5A
|
-6% ~ +2%
|
80mV
|
74%
|
N/A
|
|
 |
| Add this product to your ClipBook |
.jpg)
