10000W Enclosed Power Supplies with Parallel Function and PFC

Features
  • 3 Phase 3 wire △ AC 196 ~ 305V or 3 Phase 4 wire Y AC 340 ~ 530V wide range input
  • High efficiency up to 91%
  • Built-in active PFC function
  • Short circuit, Over load, Over voltage, Over temperature, Fan fail protections
  • Forced air cooling by built-in DC with fan speed control function
  • Output voltage can be trimmed between 20~110% of the rated output voltage by 1-6VDC external control signal
  • Output current can be adjusted between 20~100% of the rated output current by 1-5VDC external control signal
  • Current sharing up to 2 units
  • Alarm signal output (relay contact and open collector signal): AC fail, DC OK, fan fail, OTP
  • Built-in 12V/0.1A auxiliary output for remote control
  • Built-in remote ON-OFF control
  • Built-in remote sense function
  • 5 years warranty

RST-10000 Series are 10000W single output AC/DC power supplies with wide range 3 phase AC input and output voltage options of 24VDC, 36VDC and 24VDC. RST-10000 have wide range, external control signal, voltage and current adjustment functions and two over load protection mechanisms in the form of continuous constant current limiting mode and constant current limiting with delay shutdown after 5 seconds mode; increasing the flexibility in its within high power system design.

RST-10000 Series have built-in active PFC function and working efficiency up to 91%; the built-in fan enables the series to supply full load output at ambient temperatures under 50°C. The Parallel function is built in to allow 2 units to be connected and supply an even higher power output. Other functions include remote sense function, 12V/0.1A auxiliary power, alarm signal output for AC fail, DC OK, fain fail and over temperature protections.

Additional information

Function Auxilary Power, Current Sharing, Programmable, Remote ON-OFF, Parallel
Manufacturer MEAN WELL
Outputs Single
Standards
Style 2U
Technology Active PFC
Type AC/DC, Enclosed, PV Power
Range Power
  • Industrial control equipment
  • Automation equipment
  • Laser engravers
  • Telecommunication systems