Sunpower UKSunpower UK
Sunpower UK Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

BS-EN-ISO 9001:2000 certified BS-EN-ISO 9001:2000 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

80W Green Mode Single Output AC-DC Desktop Adapter

80W Green Mode Single Output AC-DC Desktop Adapter Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3...
All Products in Development

RCP-1000 Series - 1000W Front End Power System

Features

  • Universal AC input
  • Built-in 5V/0.3A auxiliary power
  • Built-in active PFC function, PF>0.96
  • Short circuit, over load, over voltage & over temperature protections
  • Forced air cooling by built-in DC fan with fan speed control
  • Low profile:1U height
  • Active current sharing up to 3000W (3 units)in 19" rack
  • Remote control for single unit
  • Built-in remote sense function
  • Output voltage trimming function
  • Hot-swap operation
  • Optional I C serial data bus
  • AC OK & DC OK signal
  • Internal ORing diode
  • Option of AC Inlet or Terminal block on Rack

Applications

  • Server instrumentation
  • Telecoms
  • Datacoms

Description

1U low profile 19" rack mount power solution consisting of 1 to 3 hot-swappable RCP-1000 units that, up to 3000W, can be provided in a single rack. Featuring active PFC and 10.67W/in2 extremely high power density. With the ability to provide rated output wattage even at 100VAC input, due to its high efficiency design, and three output voltage levels that can allow 12V@180A, 24V@120A, 48V@63A to be selected as the front end power configuration. The racks can also be paralleled together (up to 3 racks) for higher wattage output applications.For Rack System specifications click here.

Standards

PFCParallelCBTUVCSUUSCE
1U Rack Power System - RCP-1000 Series - 1000W Front End Power System

Case Details

Unit: 295 x 127 x 41mm Rack: 483.6 x 350.8 x 44mm

Specification

UNIT SPECIFICATION
Input Voltage 90 ~ 264Vac 127 ~ 370Vdc
Input Frequency 47 ~ 63Hz
Inrush Current 50A, cold start
Leakage Current <1.1mA/ 230Vac
Set Up, Rise Time 1000ms, 60ms/230Vac at full load
Hold Up Time 16ms/230Vac at full load
Over Load Protection 105 ~ 125%rated output power
Constant current limiting, recovers automatically after fault condition is removed
Over Voltage Protection Shut down o/p voltage, re-power on to recover
Over Temperature Protection 75°C ±5°C (TSW1) Detect on heatsink of power transistor
85°C ±5°C (TSW2) Detect on heatsink of power diode
Shut down o/p voltage, recovers automatically after temperature goes down
Auxiliary Power 5V @ 0.3A
Remote On/Off Control By electrical signal or dry contact ON: short OFF: open
Remote Sense Compensate voltage drop on the load wiring up to 0.5V
DC OK Signal Open collector signal, on when Vout >80% ±5%, max. sink current:10mA
AC Fail Signal Open collector signal, refer to function manual
Output Voltage Trim Adjustment of output voltage, possible between 90 ~ 110% of rated output
Over Temperature Warning Logic High for over temperature warning, refer to function manual
Working Temperature -20°C to +60°C (Refer to output load derating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temperature, Humidity -40°C to +85°C, 10 ~ 95% RH
Temperature Coefficient ±0.02%/°C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X,Y, Z axes
Withstand Voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.7KVDC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Safety Standards UL60950-1,TUV EN60950-1 Approved
EMC Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3,
EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
MTBF 43.4Khrs min. MIL-HDBK-217F (25°C)

Items

RCP-1000 UNIT DATA

Part Code Volts Rated Current Current Range Rated Pwr R&N Volt. Adj. Tol. Line Reg. Load Reg. Eff. AC Current OVP
RCP-1000-12 12V 60A 0 ~ 60A 720W 150mV 11.6 ~ 12.4V ±1.0% ±0.5% ±0.5% 81% 8.5A/115Vac 4.5A/230Vac 13.2 ~ 16.2V
RCP-1000-24 24V 40A 0 ~ 40A 960W 200mV 23.2 ~ 24.8V ±1.0% ±0.5% ±0.5% 87% 10.5A/115Vac 5.5A/230Vac 26.4 ~ 32.4V
RCP-1000-48 48V 21A 0 ~ 21A 1008W 300mV 46.3 ~ 49.7V ±1.0% ±0.5% ±0.5% 89% 11A/115Vac 455A/230Vac 52.8 ~ 64.8V
Download PDF document  (724KB)

 

 
© Copyright 2008 Sunpower UK : Website design, hosting & Technology: Strategies Group Plc