We make every effort to ensure the information provided is accurate however we can not be held responsible for errors.
Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.
PM-10 Series - 10W Single Output Encapsulated Medical Power Supply
Standards
.jpg)
.jpg)
.jpg)
Download PDF DatasheetDescription
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for "green mode" power supplies. Standard functions include short circuit, over load and over voltage protections. Suitable for use in general medical or for industrial usage that require low leakage current, general electronic applications and low profile IT equipment these on-board type PSU's can be applied on the main control PCB of the final systems.
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Fixed switching frequency at 67KHz
- Short circuit, over load & over voltage protections
- UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
- Cooling by free air convection
- Fixed switching frequency at 67KHz
Applications
- Non-patient connect medical
- General electronics
- IT equipment
- Industrial
PM-10 Series Specifications
| Part Number | Voltage (max/rated) | Current (amps) | Power (watts) | R&N (mV) | Efficiency (%) | Action |
|---|---|---|---|---|---|---|
| PM-10-3-3 | 3.3V | 2.5A | 8.25W | 150mV | 66% | Request a Quote |
| PM-10-5 | 5V | 2A | 10W | 150mV | 74% | Request a Quote |
| PM-10-12 | 12V | 1A | 10.2W | 150mV | 78% | Request a Quote |
| PM-10-15 | 15V | 1A | 10.05W | 150mV | 79% | Request a Quote |
| PM-10-24 | 24V | 0.42A | 10.08W | 240mV | 79% | Request a Quote |