ATC-S Series - 10W Single Output Encapsulated PCB Power Supply
Home > Products >PCB Mount > 10W Single Output Encapsulated PCB Power Supply
Features- Switching Power Modules for PCB Mounting
- Fully Encapsulated Plastic Case
- Universal Input Range 90-264VAC, 47-440Hz
- Regulated Output
- Low Ripple and Noise
- High Efficiency
- CE, cUL, TUV Approvals
Description1.5A slow blow type external fuse recommended. Free air convection cooling
|
Standards
  
|
Case Details
64.0 x 45.0 x 20.5 mm
|
Specification
| Input Voltage |
90~264Vac or 120-370Vdc |
| Input Frequency |
47~440Hz |
| Input Current (Full load) |
200mA max. (115Vac) / 130mA max. (230Vac) |
| Inrush Current (<2ms) |
10A max. (115Vac) / 20 A max. (230Vac) |
| Leakage Current |
0.75mA max. |
| Voltage Accuracy |
±2% |
| Line Regulation (LL-HL) (typ.) |
±0.3% |
| Load Regulation (5-100%) (typ.) |
±0.5% |
| Maximum Capacitive Load |
470-23,000µF depending on model |
| Ripple |
<0.2% Vout +40mV max (Vp-p) |
| Noise |
<0.5% Vout +50mV max (Vp-p) |
| Hold Up Time |
15 ms min. |
| Switching Frequency |
100 kHz |
| Over Power Protection |
Hiccup technique, auto recovery |
| Over Voltage Protection |
Zener diode clamp |
| Short Circuit Protection |
Hiccup mode, indefinite (automatic recovery) |
| Isolation |
I/P-O/P: 3000V I/P-FG: 1500V O/P-FG: 500V |
| Operating Temperature |
-25°C~+70°C |
| Storage Temperature |
-40°C~+85°C |
| Temperature Coefficient |
±0.02%/°C |
| Humidity |
95% RH |
| Safety |
UL/cUL, CE, TUV |
| EMC |
EN 55022 Class B, EN 50082-1 |
| M.T.B.F |
>250,000 h @ 25°C (MIL-HDBK-217F) |
| Case Material |
Plastic resin with Fibreglass (flammability to UL 94V-0) |
|
Items
ATC-S Series Output Data
|
 (444KB)
|
.jpg)
