Custom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UKCustom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UK
Sunpower UK Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

BS-EN-ISO 9001:2000 certified BS-EN-ISO 9001:2000 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

80W Green Mode Single Output AC-DC Desktop Adapter

80W Green Mode Single Output AC-DC Desktop Adapter Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3...
All Products in Development

MDR-10 Series - 10W Single Output Industrial Din Rail Power Supply

Home > Products >Din Rail Power Supplies > 10W Single Output Industrial Din Rail Power Supply

Features

  • Universal AC input
  • Short circuit, over load, over voltage protections
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • NEC class 2 / LPS compliant
  • Built in DC OK active signal
  • LED indicator for power on
  • No load power consumption <0.75W
  • 100% full load burn-in test
  • Fixed output voltage

Applications

  • Factory automation
  • Process control
  • Signal sensor
  • electro-mechanical
  • Datacommunications
  • IT

Description

MDR-10 Series is a range of 10W Class I, full isolated enclosed plastic case, din rail power supplies. With up to 85% efficiency and free air convention cooling, up to 70C, MDR-10's reliability and lifetime is significantly increased. Featuring low no load power consumption of <0.75W, short circuit, over load & over voltage protections and DC OK signal for monitoring the status of the PSU MDR-10 Series can be implemented into a wide range of applications.

Standards

CULCBTUVCE
MDR-10 Series - 10W Din Rail Power Supplies - MDR-10 Series - 10W Single Output Industrial Din Rail Power Supply
Energy Saving Low No Load Power Consumption

Case Details

22.5 x 90 x 100mm

Specification

Input Voltage 85 ~ 264Vac 120 ~ 370Vdc
Input Frequency 47 ~ 63Hz
Input Current 0.33A/115Vac 0.21A/230Vac
Inrush Current 35A/115Vac 70A/230Vac cold start
Leakage Current <1mA/ 240Vac
Set Up, Rise Time 500ms, 30ms/230Vac 1000ms, 30ms/115Vac at full load
Hold Up Time 50ms/230Vac 20ms/115Vac at full load
Over Load Protection Above 105%rated output power
Hiccup mode, recovers automatically after fault condition is removed
Over Voltage Protection Shut down o/p voltage, re-power on to recover
Working Temperature -20°C ~ +70°C (Refer to output load derating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temperature, Humidity -40°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient ±0.03%/°C (0 ~ 50°C)
Vibration Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes;
Mounting: Compliance to IEC60068-2-6
Withstand Voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Safety Standards UL508,TUV EN60950-1 approved, NEC class 2 / LPS compliant
EMC Compliance to EN55011,EN55022 (CISPR22), EN61204-3 Class B; EN61000-3-2,-3; ENV50204;
EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024,EN61000-6-1,EN61204-3, light industry level, criteria A
MTBF 584K hrs min. MIL-HDBK-217F (25°C)

Items

MDR-10 Series Output Data

Part No Voltage Rated Current Rated Pwr R&N Tol. Line Reg. Load Reg. Eff. OVP DC OK Signal
MDR-10-5 5V 2A 10W 80mV ±5.0% ±1.0% ±5.0% 76% 5.75 ~ 6.75V 3.75 ~ 6V/50mA
MDR-10-12 12V 0.84A 10W 120mV ±3.0% ±1.0% ±3.0% 80% 13.8 ~ 16.2V 9 ~ 13.5V/40mA
MDR-10-15 15V 0.67A 10W 120mV ±3.0% ±1.0% ±3.0% 80% 17.25 ~ 20.25V 11.5 ~ 16.5V/40mA
MDR-10-24 24V 0.42A 10W 150mV ±2.0% ±1.0% ±2.0% 85% 27.6 ~ 32.4V 18 ~ 27V/20mA
Download PDF document  (428KB)

 

 
© Copyright 2008  Sunpower UK - Custom Power Supplies - Bespoke Power Supply - Power Supply Supplier

Sunpower UK is one of the UK's leading suppliers of power supplies, custom power supply and bespoke power supplies. Our range of power supplies covers a range of applications and industries including laboratory power supplies, medical grade power supplies, data storage power supplies and Epos power supplies.

Our highly experienced professionals can advise on all aspects of custom power supplies for business and industry applications, offering a first class friendly service from point of contact through to completion of purchase and after sales service.