Custom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UK
Sunpower UK Sunpower (UK) Ltd, Orion House, Calleva Park, Aldermaston, Berkshire, RG7 8SN.
Tel: +44 (0)118 981 1001 Fax: +44 (0)118 981 2002 Web: www.sunpower-uk.com
Sunpower UK
Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

BS-EN-ISO 9001:2008 certified BS-EN-ISO 9001:2008 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

400W True Sine Wave DC/AC Power Inverter

400W True Sine Wave DC/AC Power Inverter TS-400 Series are high performance DC/AC power inverters released to cover lower wattage...
All New Products

In Development

3000W DC/AC Inverter with Solar Charger

3000W DC/AC Inverter with Solar Charger TN-3000 Series is a high performance true sine wave DC/AC power inverter that uses high frequency...
All Products in Development

NFM-10 Series - 10W Single Output On-board Type Medical PSU

Home > Products >Medical Grade Power Supplies > 10W Single Output On-board Type Medical PSU

Features

  • Universal AC input/full range
  • Ultra low profile
  • Isolation class II
  • No load power consumption <0.5W
  • Fixed switching frequency at 67KHz
  • Short circuit, OLP, OVP & OTP
  • Compliance to UL60601-1 & TUV EN60601-1 medical standards
  • Cooling by free air convection

Applications

  • Non-patient contact medical
  • General electronics
  • IT equipment
  • Industrial

Description

Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for "green mode" power supplies. Standard functions include short circuit, over load and over voltage protectiosn and over temperature protection is equipped on the whole NFM series. Suitable for use in general medical or for industrial usage that require low leakage current, general electronic applications and low profile IT equipment these on-board type PSU's can be applied on the main control PCB of the final systems.

Standards

TUVMedicalMEDICALCBCSUUSCE
NFM-10 Series Product Image - NFM-10 Series - 10W Single Output On-board Type Medical PSU

Case Details

65 x 45 x 22mm

Specification

Input Voltage 85 ~ 264VAC 120 ~ 370VDC
Input Frequency 47 ~ 440Hz
AC Current 0.25A/115VAC 0.15A/230VAC
Inrush Current 25A/115VAC 45A/230VAC typically, cold start
Setup, Rise Time 1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load
Holdup Time 100ms/230VAC 20ms/115VAC typically at full load
Overload Protection Above 105% rated output power
Hiccup mode, recovers automatically after fault condition is removed
Over Voltage Protection Protection type Shut off
Over Temperature Protection Tj 145°C typically (U1) Detect on main control IC
Shut down o/p voltage, recovers automatically after temperature goes down
Working Temperature -20°C to +70°C (Refer to output load derating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temperature, Humidity -40°C to +85°C, 10 to 95% RH
Temp Coefficient ±0.03%/°C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
Satety Standards UL60601-1,TUV EN60601-1 Approved
Withstand Voltage I/P-O/P:4KVAC
Isolation Resistance I/P-O/P:100M Ohms/500VDC
EMC Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B, EN61000-3-2,-3
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, EN61204-3 Medical level, criteria A.
MTBF 723.2Khrs min. MIL-HDBK-217F (25°C)
Dimensions 65 x 45 x 22mm

Items

NFM-10 Series Output Data

Part Code Voltage Rated Current Current Range Rated Power R&N Volt. Adj.
NFM-10-3.3 3.3V 2.5A 0 ~ 2.5A 8.25W 80mV 3 ~ 3.63V
NFM-10-5 5V 2A 0 ~ 2A 10W 80mV 4.5 ~ 5.5V
NFM-10-12 12V 0.85A 0 ~ 0.85A 10.2W 150mV 10.8 ~ 13.2V
NFM-10-15 15V 0.67A 0 ~ 0.67A 10.05W 150mV 13.5 ~ 16.5V
NFM-10-24 24V 0.42A 0 ~ 0.42A 10.08W 240mV 21.6 ~ 26.4V
.
Part Code Tol. Line Reg. Load Reg. Eff. OVP
NFM-10-3.3 ±2.0% ±1.0% ±1.0% 67% 3.8 ~ 4.95V
NFM-10-5 ±2.0% ±1.0% ±1.0% 74% 5.75 ~ 6.75V
NFM-10-12 ±1.0% ±0.5% ±0.5% 79% 13.8 ~ 16.2V
NFM-10-15 ±1.0% ±0.5% ±0.5% 80% 17.25 ~ 20.25V
NFM-10-24 ±1.0% ±0.5% ±0.5% 79% 27.6 ~ 32.4V
Download PDF document  (273KB)

 

 
© Copyright 2010  Sunpower UK - Custom Power Supplies - Bespoke Power Supply - Power Supply Supplier

Sunpower UK is one of the UK's leading suppliers of power supplies, custom power supply and bespoke power supplies. Our range of power supplies covers a range of applications and industries including laboratory power supplies, medical grade power supplies, data storage power supplies and Epos power supplies.

Our highly experienced professionals can advise on all aspects of custom power supplies for business and industry applications, offering a first class friendly service from point of contact through to completion of purchase and after sales service.