| Input Voltage |
88 ~ 132VAC/ 176 ~ 264VAC selected by switch |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
>0.65 (with PFC series) |
| AC Current |
3A/115V 1.5A/230V |
| Inrush Current |
Cold start, 25A/115V 50A/230V |
| Leakage Currrent |
<1.5mA/240VAC |
| LED Indicators |
Red: Load 46% ±10%> Green: Load 46% ±10%< |
| Over Load Protection |
90 ~ 110% rated output power |
|
Constant current limiting, recovers automatically after fault condition is removed. |
| Over Voltage Protection |
Hiccup mode, recovers automatically after fault condition is removed |
| Over Temperature Protection |
RTH2 ≥70°C ±10°C, Detect on RTH2 thermistor |
|
Shutdown o/p voltage, recovers automatically after temperature goes down. |
| Working Temperature |
-10°C to +45°C, (refer to output load derating curve) |
| Working Humidity |
20~90% RH non-condensing |
| Storage Temperature, Humidity |
-20°C to +85°C, 10~95% RH |
| Temperature Coefficient |
±0.05%/°C (0~45°C) |
| Vibration |
10~500Hz, 2G 10min./1cycle,60min.each along X,Y,Z axes |
| Withstand Voltage |
I/P-O/P:3KV, I/P-FG:1.5KV, O/P-FG:0.5KV |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| Safety Standards |
UL60950-1, TUV E60950-1, EN60335, EN60335-1, EN60335-2-29 Approved |
| EMC |
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,-3, |
|
EN61000-4-2,3,4,5,6,8,11;ENV50204, EN55024, Light industry level, Criteria A |
| DC Cable |
SPT-2, 18AWG 2core; 183cm ±5cm |
| DC Connector |
MIC 3P Male Type; Pin 1 +V, Pin 2 -V |
| MTBF |
149.6K hrs min. MIL-HDBK-217F (25°C) |
.jpg)
.jpg)
