SPX-6200A1 - 200W 1U Active PFC ATX Power Supply
Home > Products >PC Power Supplies > 200W 1U Active PFC ATX Power Supply
Features- AC input 115V / 230V Auto sensing
- Remote control power ON/OFF
- Over load, over voltage & short circuit protection
- Built in EMI filter, low ripple noise
- Built-in long life ball bearing fan
- 100% 50°C burn-in test
- Meet Intel ATX 2.01 / ATX2.03 / ATX 12V / EPS
- UL, cUL, TUV, ,CB, CE certified
- Please note these units are fitted with power on LED above the on/off switch
|
Standards
   
|
.jpg)
Case Details
100 x 180 x 40.5mm
|
Specification
| Input voltage |
90 ~ 132 V AC@115V, 180 ~ 264 VAC@230V, auto sensing. |
| Input frequency |
47 ----- 63Hz |
| Input current |
<5.0A @ 115V AC input, <3.0A @ 230V AC input. |
| Inrush current |
40A max./115VAC, 80A max./230VAC full load |
| Leakage Current |
<30A@115V / <60A@230V AC input |
| Overload protection |
Over 105% ~ 180% of rating, shutdown. |
| Short circuit protection |
Shutdown. |
| Rise time |
<20mS |
| Hold up time |
>20mS@ 230V |
| TTL Signal |
Power Good Signal, PS-ON Signal |
| Working temperature |
Operating: -10~70°C; De-rating: 45°C ~ 70°C : 2.5%/°C. Storage: -10~+75°C |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F |
166k hours |
| Safety standard |
UL 60950-1, CSA C22.2 No 60950-1, TUV EN 60950-1, IEC 60950-1, EMKO-TSE (74-SEC) 207/94 approved. |
| EMI standard |
EN 55022 CLASS B , FCC CFR 47 PART 15 CLASS B, CNS 13438 CLASS B |
| EMS standard |
EN 55024 : EN 61000-4-2,3,4,5,6,8,11 |
|
Items
SPX-6200-A1
|
Part No
|
Voltage
|
Min Load
|
Max Load
|
Reg
|
R&N
|
Max Power
|
Efficiency
|
|
SPX-6200A1
|
+3.3V
|
0A
|
15A
|
±5%
|
50mV
|
130W
|
70%
|
|
|
+5V
|
0.5A
|
25A
|
±5/-4%
|
50mV
|
130W
|
70%
|
|
|
+12V
|
0.2A
|
13A
|
±5%
|
120mV
|
200W
|
70%
|
|
|
-5V
|
0A
|
0.5A
|
±5%
|
70mV
|
200W
|
70%
|
|
|
-12V
|
0A
|
1A
|
+8/-10%
|
240mV
|
200W
|
70%
|
|
|
+5Vsb
|
0A
|
2A
|
±5%
|
100mV
|
200W
|
70%
|
|
|
.jpg)
