Custom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UKCustom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UK
Sunpower UK Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

BS-EN-ISO 9001:2000 certified BS-EN-ISO 9001:2000 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

80W Green Mode Single Output AC-DC Desktop Adapter

80W Green Mode Single Output AC-DC Desktop Adapter Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3...
All Products in Development

MPD-200 Series - 200W Dual Output Medical Open Frame Power Supply

Home > Products >Medical Power Supplies > 200W Dual Output Medical Open Frame Power Supply

Features

  • Universal AC input / Full range
  • Built-in active PFC, PF>0.95@230VAC
  • Low leakage current <180µA
  • Free air convection for 140W and forced air convection for 200W
  • Power good and fail signal output
  • Built-in remote ON-OFF control & remote sense function
  • Fixed switching frequency at 100KHz
  • Compliance to UL2601-1 & TUV EN60601-1 medical standards

Applications

  • Non-patient contact medical
  • 1U
  • General electronics
  • Low Profile IT

Description

MPD-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection fooling for wither medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B EMI regulations. Standard function sinclude short circuit, over load, over voltage and over temperature protections, PG/PF signal output, remote sense and remote ON/OFF control that covers most of the demands for typicall usages. Since the height is only 35.5mm the MPD-200 series are also suitable for 1U applications or other height constraint applications.

Standards

TUVMedicalMEDICALPFCCBCSUUSCE
Product Image - MPD-200 Series - 200W Dual Output Medical Open Frame Power Supply

Case Details

177.8 x 107.2 x 35.5mm

Specification

Input Voltage 90~264 VAC, 127~370VDC
Input Frequency 47~440Hz
Power Factor PF>0.95/230VAC PF>0.98/115VAC, full load
AC Input Current 3.5A at 115VAC, 60Hz or 1.6A at 230VAC, 60Hz full load
Inrush Current <25A at 115VAC or <40A at 230VAC Cold start
Setup, Rise Time 1000ms, 20ms / 230VAC at full load , 3000ms, 20ms / 115VAC at full load
Hold-Up Time 16ms / 230VAC at full load, 16ms / 115VAC at full load
Leakage Current <180µA at 264VAC for earth leakage
<100µA at 264VAC for patient leakage
DC Output ADJ Range -5% to +10% rated output, on first output
Over Load Protection 120~160% rated load
Auto recovery once fault condition removed
Over Voltage Protection 115%~135% rated load, on first output
Over Temperature Protection At 95°C. Will shut down and recover automatically after temperature goes down.
Power Good/Fail Signal TTL logic high for power good and TTL low for power fail.
Remote Control RC+/RC-:0 ~ 0.8V=power on; 4 ~ 10V=power off sink current<4~10mA
Working Temperature -20°C to 70°C (refer to derating curve)
Working Humidity 20~90% RH non-condensing.
Storage Temperature -40°C to +85°C
Storage Humidity 10~90% RH
Temperature Coefficient ±0.04%/°C (0~50°C) full load
Vibration 2G 10Hz ~500Hz 10 min cycle.
Medical Safety Standards UL60601-1, TUV EN60601-1 approved
Commercial Safety Standards Complies with UL60950-1, TUV EN60950-1
Withstand Voltage I/P-O/P: 4000VAC I/P-FG, O/P-FG: 1500VAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG : >100M Ohms
EMI Compliance to EN55011 Class B, EN55022 Class B, EN61000-3-2, EN61000-3-3
EMS Compliance to EN61000-4-2 Level 3, 8KV, EN61000-4-2 Level 2, 4KV
EN61000-4-3 Level 2, 3V/m , EN61000-4-3 Level 3, 10V/m,
EN61000-4-4 Level 2, 1KV/5KHz, EN61000-4-4 Level 3, 2KV/5KHz
EN61000-4-5 Level 4, 2KV/Line-Line, 4KV/Line-Earth,
EN61000-4-6 Level 2, 3Vrms/m, Level 3, 10Vrms/m
EN61000-4-8 Level 2, 3A/m, EN61000-4-8 Level 3, 10A/m, EN61000-4-11 Compliance
ENV50204 Level 2, 3V/m, 900MHz, ENV50204 Level 3, 10A/m, 900MHz
MTBF 262,100 hours min MIL-HDBK-217F
Dimensions 177.8 x 107.2 x 35.5mm

Items

MPD-200 Series Output Data

Part Code Output Rated Current Min. Load Current, Convection Output Current with fan (25CFM) Peak load (with fan) R&N Tol. Line Reg. Load Reg. Eff.
MPD-200A 5V 20A 4A 15A 20A 24A 80mV ±2.0% ±0.5% ±1.0% 82%
12V 8A 0.8A 5.4A 8A 9.6A 120mV +8,-5% ±1.0% ±4.0%
MPD-200B 5V 20A 4A 15A 20A 24A 80mV ±2.0% ±0.5% ±1.0% 83%
24V 4A 0.4A 2.7A 4A 4.8A 180mV ±6.5% ±1.0% +4,-6%
Download PDF document  (522KB)

 

 
© Copyright 2008  Sunpower UK - Custom Power Supplies - Bespoke Power Supply - Power Supply Supplier

Sunpower UK is one of the UK's leading suppliers of power supplies, custom power supply and bespoke power supplies. Our range of power supplies covers a range of applications and industries including laboratory power supplies, medical grade power supplies, data storage power supplies and Epos power supplies.

Our highly experienced professionals can advise on all aspects of custom power supplies for business and industry applications, offering a first class friendly service from point of contact through to completion of purchase and after sales service.