SDS 200 Series - 200W Single Output Enclosed DC-DC Power Supply
Home > Products >Enclosed > 200W Single Output Enclosed DC-DC Power Supply
Features- DC Input 19V — 32V
- Inrush current limitation soft start function
- Input & output isolation
- Input polarity reverse protection
- Input under / over voltage protection
- Over load, over voltage & short circuit protection
- Over temperature protection (optional)
- Remote control ON/OFF (optional)
- Output voltage ±10% adjustment
- 100% 50° burn-in test
- Meet UL, cUL, TUV, ,CB, CE standard
|
Case Details
198 x 99 x 50 mm
|
Specification
| Input Voltage |
DC 19V ~ 36V (Typical 24V) |
| Input Current |
<15A@19V DC input, full load condition |
| Inrush Current |
<30A@24V DC input, full load condition |
| Over Load Protection |
Over 105% ~ 180% of rating, recovers automatically after fault condition has been removed. |
| Over Temperature Protection |
Optional, shutdown when the temperature of power supply reach 95℃ |
| Short Circuit Protection |
Shutdown, recovers automatically after fault condition has been removed. |
| Rise Time |
<20mS |
| Remote Control On/Off |
Optional. RC+/RC- : 0~0.7V=Power On; 5~10V=Power Off. Sink Current: 3~10mA |
| Cooling |
A 16CFM (min.) DC Fan. |
| Temperature |
Operating: 0~70℃; derating: 45℃ ~70℃ : 2.5%/℃. Storage: -10~+75℃ |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F. |
227K hours |
| Safety |
Meet UL 60950, CSA C22.2 No.60950, TUV EN 60950, IEC 60950, EMKO-TSE (74-SEC)207/94 |
| EMI |
FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CLASS B. |
| EMS |
EN 50082-1 (1997) |
| Packing |
N.W.: 1.0Kg / 1pc; 18pcs / 1.38 Cu ft3 / 1 CTN |
|
|
.jpg)
