Features- Universal AC input/full range
- Ultra low profile
- No load power consumption <0.75W
- Short circuit, OLP & OVP
- UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
- Cooling by free air convection
- Fixed switching frequency at 90KHz
Applications- Non-patient connect medical
- General electronics
- IT equipment
- Industrial
DescriptionThe PM series has been developed to extend our medical product line to include 5 to 20W applications. Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.75W so that it complies with the requirements for "green mode" power supplies. Standard functions include short circuit, over load and over voltage protections. Suitable for use in general medical or for industrial usage that require low leakage current, general electronic applications and low profile IT equipment these on-board type PSU's can be applied on the main control PCB of the final systems.
|
Standards
    
|
Specification
| Input Voltage |
85 ~ 264VAC 120 ~ 370VDC |
| Input Frequency |
47 ~ 440Hz |
| AC Current |
0.6A/115VAC 0.4A/230VAC |
| Inrush Current |
30A/115VAC 65A/230VAC typically, cold start |
| Setup, Rise Time |
500ms, 20ms/230VAC 500ms, 20ms/115VAC at full load |
| Holdup Time |
50ms/230VAC 16ms/115VAC typically at full load |
| Overload Protection |
Above 105% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Protection type Shut off |
| Working Temperature |
-20°C to +60°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C to +85°C, 10 to 95% RH |
| Temp Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes |
| Satety Standards |
UL60601-1,TUV EN60601-1 Approved |
| Withstand Voltage |
I/P-O/P:4KVAC I/P-FG:1.5KVAC O/P-FG:1.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMC |
Compliance to EN55011(CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, EN61204-3 Medical level, criteria A. |
| MTBF |
487.8Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
94 x 56 x 22.7mm |
|
