| Voltage range |
90 ~ 264VAC 135 ~ 370VDC |
| Frequency range |
47 ~ 63Hz |
| AC current |
0.7A / 100VAC |
| Inrush current (max) |
40A / 230VAC |
| Leakage current (max) |
0.75mA / 240VAC |
| Line regulation |
±1.0% |
| Setup, rise, hold time |
200ms, 50ms, 16ms at full load |
| Overload protection |
5V~9V: 110 ~ 150% rated output power. 12V~48V:130 ~ 180% rated output power |
|
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Over voltage protection |
105 ~ 135% rated output voltage |
|
Protection type: Recovers automatically after fault condition is removed |
| Working temp. |
0 ~ +50°C (refer to putput load derating curve) |
| Workinig humidity |
20% ~ 90% RH non-condensing |
| Storage temp., humidity |
-20 ~ +85°C, 10 ~ 95% RH |
| Temp. coefficient |
±0.03% / °C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes |
| MTBF |
500Khrs min. MIL-HDBK-217F (25°C) |
| Safety standards |
UL60950-1, CSA22.2, EN60950-1 Pending |
| Withstand voltage |
I/P-O/P:3KVAC, I/P-FG:1.5KVAC |
| Isolation resistance |
I/P-O/P, I/P-FG:100M Ohms / 500VDC |
| EMI conductioin & radiation |
Compliance to EN55022 class B |
| Harmonic current |
Compliance to EN61000-3-2,3 |
| EMS immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, Criteria A |
| Connector Plug |
Standard type P1J: 2.1mm x 5.5mm x 11mm, turning fork type center positive |
| Connector Cable |
Standard type UL1185 6ft (with ferrite core) |
.jpg)
