SPW-6250P1 - 250W 1U Active PFC ATX Power Supply
Home > Products >PC Power Supplies > 250W 1U Active PFC ATX Power Supply
Features- Universal full range AC input with active PFC, P.F.> 0.95
- +3.3V, +5V main output remote sensing
- Over load, over voltage & short circuit protection
- Built-in long life ball bearing fan
- 100% 50°C burn-in test
- Meet Intel ATX 2.01 / ATX2.03 / ATX 12V / EPS
- UL, cUL, TUV, ,CB, CE certified
DescriptionThe maximum continuous power for both +3.3V & +5V is 130W. Total ouput at maximum is 250w
|
Standards
    
|
.jpg)
Case Details
83 x 250 x 40.5 mm
|
Specification
| Input Voltage |
90V ~ 264V universal full range, single phase |
| Input Frequency |
47~63 Hz |
| Current |
<4.0A @ 100V AC input, full load condition |
| Inrush Current |
<40A@115V / <80A@230V AC input, full load condition. Cold start at 25°C ambient |
| Leakage Current |
<1.5mA@264V AC input |
| Power Factor |
Meet IEC 1000-3-2 class D, P.F.>0.95 |
| Over Load Protection |
Over 105% ~ 180% of rating, shutdown |
| Over Voltage Protection |
+3.3V: +3.8V~+4.6V, +5V: +5.8V~+7.0V, +12V: +13.8V~+17.5V |
| Short Circuit Protection |
Shutdown |
| Efficiency |
70% |
| Rise time |
<30mS |
| Hold up time |
>20mS @230V |
| TTL Signal |
Power Good Signal, PS-ON Signal |
| Cooling |
A 10CFM (min.) DC ball bearing Fan |
| Temperature |
Operating: 0~70°C; derating: 45°C ~70°C : 2.5%/°C. Storage: -10~+75°C |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F. |
120K hours |
| Safety |
UL 60950, CSA C22.2 No.60950, TUV EN 60950, IEC 60950, EMKO-TSE (74-SEC)207/94 Certified |
| EMC |
FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CALSS B, EN 50082-1 (1997) |
|
Items
SPW-6250P1
|
Part Code
|
Voltage
|
Min Load
|
Max Load
|
Reg
|
R&N
|
|
SPW-6250P1
|
+3.3V
|
0A
|
20A
|
±5%
|
50mV
|
|
|
+5V
|
0.5A
|
26A
|
+5/-4%
|
50mV
|
|
|
+12V
|
0.5A
|
15A
|
±5%
|
120mV
|
|
|
-5V
|
0A
|
0.5A
|
±5%
|
50mV
|
|
|
-12V
|
0A
|
1A
|
+8/-5%
|
120mV
|
|
|
+5Vsb
|
0A
|
2A
|
±5%
|
50mV
|
|
|
.jpg)
