SPR-2321-A2 - 320+320W 2U Raid PFC Mini Redundant Hot Swap
Home > Products >Hot Swap > 320+320W 2U Raid PFC Mini Redundant Hot Swap
Features- AC input 115V/230V Auto sensing
- Hot swap, easy to install, zero transfer time
- +3.3V & +5V main output remote sensing
- Power fail, fan fail alarm and TTL signal
- Remote control power on/off
- Over load, over voltage & short circuit protection
- System over temperature detecting function(option)
- Or-in Diode built inside module
- Built in EMI filter, low ripple noise
- Built-in long life ball bearing fan
- 100% 50°C burn-in test
- Meet intel ATX 2.01/ 2.03 ATX 12V
- UL, cUL, TUV, CB, CE approved
|
Standards
   
|
Case Details
150 x 175 x 83 mm
|
Specification
| Input voltage |
AC input 115V(90~132V) / 230V (180~264V) auto sensing. |
| Input frequency |
47 ~ 63Hz |
| Input current |
<8.0A @ 115VAC, <4.0A@230VAC full load condition |
| Inrush current |
<60A@115VAC, <100A@230VAC full load condition. Cold start at 25°C ambient. |
| Over load protection |
Shutdown when over 105% ~ 150% of rated loading. |
| Short circuit protection |
Shutdown. Recovers automatically after fault condition has been removed. |
| Rise time |
<60mS |
| Hold up time |
>20mS@230V. |
| TTL signal |
Power good signal; PS-ON signal. |
| Alarm |
Power fail alarm, fan fail alarm. |
| Cooling |
A16.24 CFM (min) DC ball bearing fan in each module. |
| Temperature |
Operating: -10°C ~70°C; De-rating: 45°C ~70°C : 2.5%/°C. Storage: -10~+75°C |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F |
93K hours |
| Safety standard |
UL 60950, CSA 22.2 No.60950, TUV EN 60950, IEC 60950.EMKO-TSE (74-SEC)207/94 approved. |
| EMI |
FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CLASS B |
| EMS |
EN 50082-1 (1997) |
|
Items
SPR-2321-A2
|
Part No
|
Voltage
|
Min Load
|
Max Load
|
Reg
|
R&N
|
Efficiency
|
|
SPR-2321-A2
|
+5V
|
3A
|
30 A
|
± 5%
|
50mV
|
70%
|
|
|
+12V
|
1A
|
18 A
|
± 5%
|
120mV
|
70%
|
|
|
