Custom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UKCustom Power Supplies - Power Supply Supplier - Bespoke Power Supply - Sunpower UK
Sunpower UK Product Search

Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

BS-EN-ISO 9001:2000 certified BS-EN-ISO 9001:2000 certified
We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

80W Green Mode Single Output AC-DC Desktop Adapter

80W Green Mode Single Output AC-DC Desktop Adapter Designed for both medical and ITE applications SNP-A08 Series features no load input power of <0.3...
All Products in Development

RAM-2667-P2 - 330+330W N+1 Active PFC Hot Swap Redundant System

Home > Products >Hot Swap > 330+330W N+1 Active PFC Hot Swap Redundant System

Features

  • Hot swap power module operation, easy to install, zero transfer time
  • Active current sharing output
  • Output remote sense for heavy load drop
  • Power fail, fan fail alarm and TTL signal
  • Remote control power on/off
  • Over load, over voltage & short circuit protection
  • Over temperature protection (optional)
  • Or-in diode built inside module
  • Support dual mother board system; Use DIN 41612 industrial connector
  • Built-in long life ball bearing fan
  • 100% 50°C burn-in test
  • Meet Intel ATX2.01/2.03/ATX12V

Standards

CBCECSUUSPFCTUV
Product Image - RAM-2667-P2 - 330+330W N+1 Active PFC Hot Swap Redundant System

Case Details

353 x 183 x 105 mm

Specification

Input voltage AC input 90 ~ 132VAC, 180~264VAC, auto sensing or switch selected
Input frequency AC in: 47 ~ 63 Hz
Input current <8A@115VAC, <4.5A@230VAC ; (<8A@100VAC for RAM-2663P), single module full load condition.
Inrush current <40A@115VAC, <80A@230VAC full load condition. Cold start at 25°C ambient (Single Module)
Power Factor Meet IEC 1000-3-2 class D, P.F.>0.95 (optional)
Max Power Single Module:<200W; Dual Module:<375W; Total output of dual module: 500W max continuously
Over Load Protection Over 105% ~ 150% of rated load, shutdown
Over Temperature Protection Shutdown when power supply's temperature reach 95°C (Optional)
Short Circuit Protection Shutdown.
Rise time <20mS
Hold up time >20mS@230V
TTL Signal Power good signal (for 4 & 6 output models); PS-ON signal (for 6 output models)
Alarm Power fail alarm; Fan fail alarm
Cooling A 37CFM (min.) DC ball bearing Fan in each module
Temperature Operating: 0 ~70°C; derating: 45°C ~70°C : 2%/°C. Storage: -10~+75°C
Humidity Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing)
M.T.B.F 108K hours (84K hours for PFC models)
Safety UL 60950, CSA C22.2 No.60950, TUV EN 60950, IEC 60950, EMKO-TSE (74-SEC)207/94 Certified
EMI FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CLASS B
EMS EN 50082-1 (1997)

Items

RAM-2667-P2

Part No Voltage Min Load Max Load Reg R&N Efficiency
RAM-2667-P2 +5V 3 A 75 A ± 5% 50mV 63%
+12V 1 A 16 A ± 5% 120mV 63%
Download PDF document

 

 
© Copyright 2008  Sunpower UK - Custom Power Supplies - Bespoke Power Supply - Power Supply Supplier

Sunpower UK is one of the UK's leading suppliers of power supplies, custom power supply and bespoke power supplies. Our range of power supplies covers a range of applications and industries including laboratory power supplies, medical grade power supplies, data storage power supplies and Epos power supplies.

Our highly experienced professionals can advise on all aspects of custom power supplies for business and industry applications, offering a first class friendly service from point of contact through to completion of purchase and after sales service.