| Voltage range |
90 ~ 264VAC 2A/230VAC |
| Frequency range |
47 ~ 63Hz |
| Power factor (typ.) |
3.3V: 0.94/230VAC ; 5V~48V: 0.95/230 VAC, 0.98/115VAC at full load |
| AC current (typ.) |
4A/115VAC 2A/230VAC |
| Inrush current (typ.) |
22A/115VAC 44A/230VAC |
| Leakage current |
<2mA / 240VAC |
| Voltage tolerance |
±2.0% |
| Line regulation |
±0.5% |
| Setup, rise time |
2000ms, 100ms/230VAC 4000ms, 100ms/115VAC at full load |
| Hold time (typ.) |
3.3V: 12ms/230VAC ; 5V~48V: 16ms/230VAC 16ms/115VAC at full load |
| Over load protection |
3.3V & 5V: 105~120% rated output power; 12V~48V: 105~130% rated output power |
|
Protection type:Constant current limiting, recovers automatically after fault condition is removed |
| Over voltage protection |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Over temperature protection |
80°C (3.3V~48V)(TSW1:Detect on heatsink of power transistor); 80°C±5°C(3.3V~15V),75°C±5°C(24V,48V) |
|
(TSW2:Detect on heatsink of power diode) Protection type:Shutdown o/p voltage with auto recovery |
| Working temp. |
-10~+65°C (refer to output load derating curve) |
| Working humidity |
20 ~ 90% RH non-condensing |
| Storage temp., humidity |
-40~+85°C, 10~95% RH |
| Temp. coefficient |
±0.03%/°C (0~45°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, 60min. each along X,Y,Z axes |
| MTBF |
106.3K hrs min. MIL-HDBK-217F (25°C) |
| Safety standards |
UL60950-1, TUV EN60950-1 approved |
| Withstand voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMI conduction & radiation |
Compliance to EN55022 (CISPR22) Class B |
| Harmonic current |
Compliance to EN61000-3-2,-3 |
| EMS immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A |
.jpg)
