SS-600H2U - 600W Active PFC 2U Power Supply
Home > Products >PC Power Supplies > 600W Active PFC 2U Power Supply
Features- Compliance to ATX12V V2.0 & EPS2U V2.1
- Dedicated output voltage lines
- Triple +12V outputs
- No minimum load on +3.3V rail
- 80% super high efficiency
- Easy swap connector design
ApplicationsDescriptionA 600W 2U ATX/EPS power supply, with seperate current limit on the two +12V rails, offers perfect current delivery on each voltage line. The easy swap connector design also allows for one power supply model to be utilised across different applications.
|
Standards
      
|
.jpg)
Case Details
270 x 100 x 70mm
|
Specification
| Input Voltage |
90VAC to 264VAC, full range |
| Input Frequency |
47 to 63Hz |
| Input Current |
10A maximum |
| Inrush Current |
100A max., 25°C ambient |
| Total Power |
600W |
| Peak Power |
660W max for 1 second min |
| Dynamic DC Characteristics |
±10% max. excursion for 30% max load change with return to reg in 0.5mS |
| Total Power Protection |
135% max with shut down and latch off protection |
| Short Circuit Protection |
Short on +3.3, +5, +12 & -12V will shut down these outputs only |
|
Short on +5Vsb will shut down all outputs |
| Power Good Signal |
Open collector +5Vdc, TTL compatible |
|
Logic Level <0.4V while sinking 4mA |
|
between 2.4Vdc & +5V while souring 200uA |
| Efficiency |
Over 70% at nominal input voltage |
|
0.75 at AC 110V 60Hz |
|
0.78 at AC 220V 50Hz |
| Energy Star Mode |
Over 50% at 1200W max power consumption with 60W or more delivered to DC power output |
| Standby Mode |
<6.5W at 0.5A, 230VAC 50Hz |
|
<3.0W at 0A, 230VAC 50Hz |
| Cooling Fan |
12VDC, 20CFM. <38dB(A) |
| Power Factor Correction |
Active PFC >0.95 at full load |
|
0.99 at 110VAC 60Hz |
|
0.98 at 220VAC 50Hz |
| Operating Temperature |
0°C to 50°C |
| Operating Humidity |
20% to 80% RH |
| Storage Temperature |
-40°C to 85°C |
| Storage Humidity |
10% to 95% RH |
| MTBF |
>100K hours, full load 25°C ambient, excluding DC fan |
| Safety standards |
TUV, cUL, CCC & CB |
| EMC |
EN61204-3:2000, FCC Part 15 & Part 2 (CISPR 22 Class B) |
|
GB9254-1998, GB17625.1-2003 standards |
|
Items
DC Output On/Off Control
|
Signal
|
|
Max.
|
Min.
|
|
T2
|
+5V Turn-On Delay
|
20mS
|
|
|
T3
|
Reset Time
|
500mS
|
100mS
|
|
T4
|
DC Save Time
|
|
1mS
|
|
T5
|
Save Time Vpg=4.75V
|
|
1mS
|
|
T6
|
Hold-On Time at nominal AC input)
|
|
16mS
|
SS-600H2U Output Data
|
Part Code
|
Voltage
|
Min Load
|
Max Load
|
Peak Load
|
Tol.
|
R&N
|
OVP
|
|
SS-600H2U
|
+3.3V
|
0.5A
|
20A
|
|
±5%
|
50mV
|
3.76 ~ 4.3V
|
|
|
+5V
|
0.3A
|
25A
|
|
±5%
|
50mV
|
5.74 ~ 7.0V
|
|
|
Max combined power on +3.3 & +5V: 150W
|
|
|
|
|
|
|
|
|
+12V1
|
1A
|
15A
|
18A
|
±5%
|
120mV
|
13.4 ~ 15.6V
|
|
|
+12V2
|
1A
|
15A
|
18A
|
±5%
|
120mV
|
13.4 ~ 15.6V
|
|
|
+12V3
|
1A
|
17A
|
20A
|
±5%
|
120mV
|
13.4 ~ 15.6V
|
|
|
Max combined power on +12V rails 45A (540W)
|
|
|
|
|
|
|
|
|
-12V
|
0A
|
0.8A
|
|
±10%
|
120mV
|
|
|
|
+5Vsb
|
0A
|
3A
|
3.5A
|
±5%
|
50mV
|
|
|
|
.jpg)
