SPS-060 Series - 60W Single Output Switching Power Supply
Home > Products >Enclosed Power Supplies > 60W Single Output Switching Power Supply
Features- Universal input 85~264 VAC or 120~375VDC
- Power factor correction (optional)
- Built in EMI filter, low ripple noise
- Over load, over voltage, short circuit protection
- Non min load requirement
- 100% 50° burn-in test
- Approvals: UL/CSA/TUV/CE
|
Standards
   
|
.jpg)
Case Details
159 x 95 x 38 mm
|
Specification
| Input Voltage |
88-132VAC or 180-264VAC, Auto sensing |
| Input frequency |
47-63Hz |
| Input current |
2A max. @ 100-250VAC |
| Inrush current |
Cold start, 25A/115VAC, 50A/230VAC |
| Leakage Current |
<1.5mA@264V AC input |
| P.F.C. |
Meet IEC 1000-3-2 class A standard. (SPS-060P & SPS-070P SER. ) |
| Over load protection |
105%-180% output, auto recovery |
| Short circuit protection |
Output shutdown with auto recovery |
| Rise time |
100mS maximum |
| Hold up time |
16.7mS/115VAC, 50mS/230VAC |
| Setup Time |
<3Sec @115V, <1Sec @230V |
| Cooling |
Natural Cooling |
| Operating temperature |
0°C-70°C |
| Humidity |
Operating: 20% ~ 85%; Storage: 10% ~ 95% (non condensing) |
| M.T.B.F. |
300K hours |
| Safety standard |
TUV EN60950, UL 1950, CSA C22.2NO.950, IEC 950, EMKO-TSE |
| EMC standard |
EN 55022 Class B, FCC Part 15 Class B,EN 50082-1, CNS 13438 Class B |
| EMS |
EN 55024：EN 61000-4-2,3,4,5,6,8,11. |
|
Items
SPS-060 Series
|
Part No
|
Voltage
|
Max. Load
|
Regulation
|
Ripple Noise (MAX)
|
Efficiency (TYP)
|
|
SPS-060-3.3
|
3.3V
|
15A
|
±3%
|
50mV
|
68%
|
|
SPS-060-05
|
5V
|
12A
|
±2%
|
50mV
|
73%
|
|
|
.jpg)
