Din Rail Power Supplies - Din Rail Power Supply

	Sunpower (UK) Ltd, Orion House, Calleva Park, Aldermaston, Berkshire, RG7 8SN. Tel: +44 (0)118 981 1001 Fax: +44 (0)118 981 2002 Web: www.sunpower-uk.com

Din rail power supplies for installation on TS35/7.5 or TS35/15 industrial rails. Available as miniature single output designs to high input voltage units with optional parallel function, the din rail power supply range from Sunpower is diverse and suitable for numerous applications. The din rail power supply range from Sunpower offers 20 to 960 Watts of power and output voltages from 5 to 48 Volts. Suitable applications for the din rail power supply range includes general Industrial applications including factory automation, electro-mechanical industry, Data communications, IT, power distribution boxes, control panels, building automation and household appliance control.

Not what you were looking for? Look through our list of products or use the search at the top of the site; if not don't worry, use our advanced product search ....

Din Rail Power Supply
There are 30 products in Din Rail Power Supply. Displaying 1 to 20 1 2 »
There are 30 products in Din Rail Power Supply. Displaying 1 to 20 1 2 »
DR-100 Series Type - AC/DC Outputs - Single	100W Single Output Class II DIN Rail Power Supply Universal AC input Short circuit, over load, over voltage, over temperature protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation class II LED indicator for power on No load power consumption<1W 100% full load burn-in test
DR-120 Series Type - AC/DC Outputs - Single	120W Single Output DIN RAIL Power Supply AC input range selectable by switch Installed on DIN rail TS35/7.5 or 15 Soft start circuit Limiting AC surge current Short circuit, over voltage, over load, over temperature protections 100% full load burn in LED indication for power on UL508(industrial control equipment) approved Fixed switching frequency at 55KHz
DR-15 Series Type - AC/DC Outputs - Single	15W Single Output Industrial DIN Rail Power Supply Universal AC input/Full range Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation class II LED indicator for power on Operating temperature: -20°C ~ 60°C No load power consumption <0.5W 100% full load burn-in test
DR-30 Series Type - AC/DC Outputs - Single	30W Single Output DIN Rail Power Supply Universal AC input/Full range Short circuit/Over Load/Over voltage protection Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation Class II LED indicator for power on 100% full load burn-in test
DR-45 Series Type - AC/DC Outputs - Single	45W Single Output DIN Rail Power Supply Full range AC input High efficiency, low working temp. Built in EMI filter, low ripple noise Compact size, light weight Short circuit, over load, over voltage, over temperature protected Fixed switching frequency at 100KHz UL 508 approved Can be installed on DIN rail TS35/7.5 or 15
DR-60 Series Type - AC/DC Outputs - Single	60W Single Output DIN Rail Power Supply Universal AC input/Full range Short circuit/Over Load/Over voltage protection Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved Isolation Class II LED indicator for power on 100% full load burn-in test
DR-75 Series Type - AC/DC Outputs - Single	75W Single Output Din Rail Power Supply Universal AC input UL508 listed approved Can be installed on Din rail TS35/7.5 or 15 Short circuit, over load, over voltage & over temperature protections LED indicator for power on Fixed switching frequency at 50KHz Free air convection cooling 100% full load burn-in test
DRH-120 Series Type - AC/DC Outputs - Single	120W Single Output DIN Rail Power Supply Short circuit, over load, over voltage & over temperature protections Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test Fixed switching frequency at 70KHz
DRP-240 Series Type - AC/DC Outputs - Single	240W Single Output DIN RAIL Power Supply Universal AC input/Full range Built in PFC circuit Installed on DIN rail TS35/7.5 or 15 Short circuit, over voltage, over load & over temperature protections Cooling by free air convection 100% full load burn in UL 508(industrial control equipment) approved Fixed switching frequency at 100KHz LED indication for power on
DRP-480 Series Type - AC/DC Outputs - Single	480W Single Output DIN RAIL Power Supply Built-in passive PFC function compliance to EN61000-3-2 High efficiency 89% and low dissipation Short circuit, over load, over voltage & over temperature protections Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test
DRP-480S Series Type - AC/DC Outputs - Single	480W Single Output DIN RAIL Power Supply AC input range selectable by switch Built-in passive PFC function compliance to EN61000-3-2 High efficiency 89% and low dissipation Short circuit, over load, over voltage & over temperature protections Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test
DR-RDN20 Type - DC/DC	Din Rail Redundant Module Suitable for redundant operation of 24V system Installed on DIN Rail TS35 / 7.5 or 15 Relay contact signal output and LED indicator for input failure alarm Cooling by free air convection
DRT-240 Series Type - AC/DC Outputs - Single	240W Three Phase Industrial DIN Rail Power Supply Three-Phase AC 340 ~ 550V wide range input High efficiency 89% and low dissipation Short circuit, over load, over voltage & over temperature protections Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test
DRT-480 Series Type - AC/DC Outputs - Single	480W Three Phase Industrial DIN Rail Power Supply Three-Phase AC 340 ~ 550V wide range input High efficiency 89% and low dissipation Short circuit, over load, over voltage & over temperature protections Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test
DRT-960 Series Type - AC/DC Outputs - Single	960W Three Phase AC-DC Industrial DIN Rail PSU Three-Phase AC 340 ~ 550V wide range input High efficiency 91% and low dissipation Short circuit/Over load/Over voltage/Over temperature protection Optional parallel function(1+1) Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test
DR-UPS40 Type - DC/DC	40A Uninterruptible Din Rail Power Supply Battery controller for DIN Rail UPS system Parallel connection to DC BUS Suitable for 24V system up to 40A Can be installed on DIN Rail TS35 / 7.5 or 15 Built-in battery test function Battery polarity protection Relay contact signal output and LED indicator for DC BUS OK,Battery OK, and Battery Discharge Cooling by free air convection
MDR-10 Series Type - AC/DC Outputs - Single	10W Single Output Industrial Din Rail Power Supply Universal AC input Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 NEC class 2 / LPS compliant Built in DC OK active signal LED indicator for power on No load power consumption <0.75W 100% full load burn-in test Fixed output voltage
MDR-100 Series Type - AC/DC Outputs - Single	100W Miniature Single Output DIN Rail Power Supply Universal AC Input Built-in active PFC function, compliance to EN61000-3-2 Short circuit, over load, over voltage, over temperature protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 LED Indicator for power on DC OK Signal No load power consumption <1W NEC Class 2 limited power source (for 24V & 48V only) 100% full load burn-in test ZCS/ZVS technology to reduce power dissipation
MDR-20 Series Type - AC/DC Outputs - Single	20W Miniature Single Output Din Rail PSU Universal AC input, full range Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Built in DC OK active signal LED indicator for power on 100% full load burn-in test No load power consumption <0.75W
MDR-40 Series Type - AC/DC Outputs - Single	40W Miniature Single Output Industrial Din Rail PSU Universal AC input, full range Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Built in DC OK relay contact LED indicator for power on DC OK Relay contract 100% full load burn-in test No load power consumption <0.75W