Our Din Rail Products are a fanless design for installation on TS35/7.5 or TS35/15 industrial rails available as a slim line 20 Watt unit through to our three phase 960 Watt unit.
Known uses include general Industrial applications including factory automation, electro-mechanical industry, Data communications, IT, power distribution boxes, control panels, building automation and household appliance control.
| Product Code |
|
Features |
| DR-UPS40 |
 |
40A Uninteruptable Power SupplyNew Product - Battery controller for DIN Rail UPS system
- Parallel connection to DC BUS
- Suitable for 24V system up to 40A
- Can be installed on DIN Rail TS35 / 7.5 or 15
- Built-in battery test function
- Battery polarity protection
- Relay contact signal output and LED indicator for DC BUS OK,Battery OK, and Battery Discharge
- Cooling by free air convection
|
| DR-RDN20 |
 |
Din Rail Instal Redundant ModuleNew Product - Suitable for redundant operation of 24V system
- Installed on DIN Rail TS35 / 7.5 or 15
- Relay contact signal output and LED indicator for input failure alarm
- Cooling by free air convection
|
| MDR-10 Series |
 |
10W Single Output Industrial Din Rail Power SupplyNew Product - Universal AC input
- Short circuit, over load, over voltage protections
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- NEC class 2 / LPS compliant
- Built in DC OK active signal
- LED indicator for power on
- No load power consumption <0.75W
- 100% full load burn-in test
- Fixed output voltage
|
| MDR-20 Series |
 |
20W Miniture Single Output Din Rail PSUNew Product - Universal AC input, full range
- Short circuit, over load, over voltage protections
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Built in DC OK active signal
- LED indicator for power on
- 100% full load burn-in test
- No load power consumption <0.75W
|
| DR-30 Series |
.jpg) |
30W Single Output DIN Rail Power Supply - Universal AC input/Full range
- Short circuit/Over Load/Over voltage protection
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Isolation Class II
- LED indicator for power on
- 100% full load burn-in test
|
| MDR-40 Series |
 |
40W Miniture Single Output Industrial Din Rail PSUNew Product - Universal AC input, full range
- Short circuit, over load, over voltage protections
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Built in DC OK relay contact
- LED indicator for power on
- DC OK Relay contract
- 100% full load burn-in test
- No load power consumption <0.75W
|
| DR-45 Series |
 |
45W Single Output DIN Rail Power Supply - Full range AC input
- High efficiency, low working temp.
- Built in EMI filter, low ripple noise
- Compact size, light weight
- Short circuit, over load, over voltage, over temperature protected
- Fixed switching frequency at 100KHz
- UL 508 approved
- Can be installed on DIN rail TS35/7.5 or 15
|
| MDR-60 Series |
 |
60W Miniture Single Output Din Rail PSUNew Product - Universal AC input, full range
- Short circuit, over load, over voltage protections
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Built in DC OK relay contact
- LED indicator for power on
- 100% full load burn-in test
- No load power consumption <0.75W
|
| DR-60 Series |
 |
60W Single Output DIN Rail Power Supply - Universal AC input/Full range
- Short circuit/Over Load/Over voltage protection
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508 (industrial control equipment) approved
- Isolation Class II
- LED indicator for power on
- 100% full load burn-in test
|
| DR-75 Series |
 |
75W Single Output Din Rail Power Supply - Universal AC input
- UL508 listed approved
- Can be installed on Din rail TS35/7.5 or 15
- Short circuit, over load, over voltage & over temperature protections
- LED indicator for power on
- Fixed switching frequency at 50KHz
- Free air convection cooling
- 100% full load burn-in test
|
| MDR-100 Series |
 |
100W Miniture Single Output DIN Rail Power SupplyNew Product - Universal AC Input
- Built-in active PFC function, compliance to EN61000-3-2
- Short circuit, over load, over voltage, over temperature protections
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- LED Indicator for power on
- DC OK Signal
- No load power consumption <1W
- NEC Class 2 limited power source (for 24V & 48V only)
- 100% full load burn-in test
- ZCS/ZVS technology to reduce power dissipation
|
| DR-100 Series |
 |
100W Single Output Class II DIN Rail Power SupplyNew Product - Universal AC input
- Short circuit, over load, over voltage, over temperature protections
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Isolation class II
- LED indicator for power on
- No load power consumption<1W
- 100% full load burn-in test
|
| DR-120 Series |
 |
120W Single Output DIN RAIL Power Supply - AC input range selectable by switch
- Installed on DIN rail TS35/7.5 or 15
- Soft start circuit
- Limiting AC surge current
- Short circuit, over voltage, over load, over temperature protections
- 100% full load burn in
- LED indication for power on
- UL508(industrial control equipment) approved
- Fixed switching frequency at 55KHz
|
| DRH-120 Series |
 |
120W Single Output DIN Rail Power Supply - Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
|
| DRP-240 Series |
.jpg) |
240W Single Output DIN RAIL Power Supply - International input range
- Built in PFC circuit
- Installed on DIN rail TS35/7.5 or 15
- Short circuit, over voltage, over load & over temperature protections
- Cooling by free air convection
- 100% full load burn in
- UL 508(industrial control equipment) approved
- Fixed switching frequency at 100KHz
- LED indication
|
| SDR-240 Series |
 |
240W Single Output Industrial Din Rail PSUNew Product - Built-in active PFC function, PF>0.93
- High efficiency 93% and low power dissipation
- Short circuit, over load, over voltage, over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK Relay contact
- 100% full load burn-in test
- 150% peak load capability
|
| DRT-240 Series |
 |
240W Three Phase Industrial DIN Rail Power Supply - Three-Phase AC 340 ~ 550V wide range input
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
|
| DRP-480 Series |
 |
480W Single Output DIN RAIL Power Supply - Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
|
| DRP-480S Series |
.jpg) |
480W Single Output DIN RAIL Power Supply - AC input range selectable by switch
- Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
|
| DRT-480 Series |
 |
480W Three Phase Industrial DIN Rail Power Supply - Three-Phase AC 340 ~ 550V wide range input
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
|
|
Found 21 products Displaying 1 to 20 Page: 1 2 [Next >>]
|
.jpg)
