The introduction of MPS/D/T/Q-200 Series with active PFC function extends our range of PCB products up to 200W. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced air or 140W with convection cooling, for either medical or industrial applications.
Featuring only 180uA of leakage current at 264VAC they can be equipped into non-patient cotact medical equipment and still comply with Class B as per EMI regulations. Standard functions include short circuit, over load, over voltage and over temperature protections, power food.power fail signal output, remote sense and remote ON/OFF control to allow them to cover most of the demands for typical applications.
As the height is only 35.5mm the MPS/D/T/Q-200 series are suitable for 1U installations or other height restraint applications. General medical usage that requires low leakage current, general electronic applications and low prifile IT equipment are all suitable applications for this mult function product series.
With the same compact size as MPS/D/T/Q-120 series the 200W version possess 66% more power density under the same dimensions. Designed to consolodate medical and industrial demands from 140W to 200W MPS/D/T/Q-200 Series are among the highest rated wattage product in pure PCB product lines.
Datasheets
MPS-200 Series Datasheet
MPD-200 Series Datasheet
MPT-200 Series Datasheet
MPQ-200 Series Datasheet
