30W IP64 Rated Enclosed Switching Power Supply

The new ELN-30 series is an addition to our LED lighting purpose product range. This 30W ac-dc enclosed switching power supply targets economical lighting applications, with it’s non PFC design it will also keep the cost of your complete product low but still complies with the requirements of UL1310 Class 2 so the output power of these limited power sources will be less than 100VA or 5A under any situation. This low power will also reduce the risk of exposure to hazardous conditions to engineers that construct/maintain the LED lighting system.

With IP64 fully enclosed plastic case ELN-30 will protect the electronic components from dust and moisture, the efficiency of this series is as high as 87%, and with operating temperatures of -20°C ~ +60°C, using only free air convection, ELN-30 is a suitable power solution for installation in harsh locations.

Standard fuctions include adjustable output voltage/current, short circuit, over load and over voltage protections. There is also the option of dimming control by 1~10Vdc or PWM signal, should you wish to adjust the brightness of LED’s connected, using external control signals.

Typical applications for these new UL1310 Class 2 power units inclide moving signs, back lighting, LED based architectural lighting, LED stage/theatre lighting and LED electronic displays.

Datasheets

ELN-30 Series Specification