Battery Chargers

Showing 16–28 of 28 results

  • 240W AC/DC Programmable Desktop Type Battery Charger

    ENC-240 is a single output 240W AC/DC desktop type charger with 3 stage charging curve.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • Built-in 3 stage programmable charging curve
    • Universal AC input /Full range
    • Built-in active PFC function
    • Fanless design, cooling by free air convection
    • Built-in temperature compensation function
    • Protection: Short circuit / Over voltage /Over temperature / Battery under voltage /Battery over voltage / Battery reverse polarity protection
    • 3 years warranty
    More information Compare
  • 30W AC-DC Power Adapter with Charging Function

    Universal AC input 30W lithium ion battery chargers designed with energy saving and the environment in mind, they also comply with global safety requirements and the 2002/95/EC RoHS requirements. No load power consumption <1W, dual colour LED, to indicate charging status, and built in short curcuit, over load, over voltage and over temperature protections are…

    Features

    • Universal AC input
    • 2 pole AC Inlet IEC320-C8
    • Class II power (without earth pin)
    • No load power consumption <1.0W
    • Constant current and voltage(CC,CV mode)
    • Suitable for continuous load
    • For high surge current equipment
    • Short circuit, over load, over voltage & over temperature protectiond
    • 2 colors LED indication for charging status
    • Fully enclosed plastic case
    • High reliability
    More information Compare
  • 330W Single Output Battery Charger

    The GC330 series is an AC/DC battery charger possessing very low “no load power consumption” and up to 93.5% of high efficiency. Offering a two stage charging curve (constant current and constant voltage) and can monitor the battery capacity by detecting the battery voltage. The device can quickly charge the battery at constant current mode…

    Features

    • 2 Stage charging characteristic
    • Universal AC input/Full range
    • Built-in active PFC function, PFC>0.95
    • 3 Pole AC inlet IEC320-C14
    • Class I power (with earth pin)
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Cooling by free air convection
    • Fully enclosed plastic case
    • No load power consumption <1W
    • 2 colour LED indicator for charging status
    More information Compare
  • 360W AC/DC Programmable Desktop Type Battery Charger

    ENC-360 is a single output 360W AC/DC desktop type charger with 3 stage charging curve.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • Built-in 3 stage programmable charging curve
    • Universal AC input / Full range
    • Built-in active PFC function
    • Fanless design, cooling by free air convection
    • Built-in temperature compensation function
    • Protection: Short circuit / Over voltage / Over temperature / Battery under voltage / Battery over voltage / Battery reverse polarity protection
    • 3 years warranty
    More information Compare
  • 40W Single Output Switching DIN RAIL Power Supplies with UPS Function

    DRC-40 Series are a range of 40W DIN Rail power supplies with secondary charger output, for use as the power supply for backup batteries, in security access systems. The range is of fanless design, has a 90-264VAC input range, efficiencies up to 87% and air convection cooled operating temperatures of -30C to +70C. DRC-40 Series…

    Features

    • Universal AC input
    • Secondary output for battery charging (UPS Function)
    • Battery low protection/Battery polarity protection by fuse
    • Alarm signal for AC OK and Battery low
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Short circuit, over load, over voltage protections
    • Cooling by free air convection
    • LED indicator for power on
    • 3 years warranty
    More information Compare
  • 600W Intelligent Single Output Battery Charger

    An intelligent 600W AC/DC battery charger for lead acid batteries with selectable 2 stage/8 stage charging characteristics. Features include built-in temperature compensation circuit, PFC function, remote ON/OFF control, fan ON/OFF control, reverse polarity, short circuit, over-voltage, and over temperature protections.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithiu, manganese)
    • 2/3/8 stage charging
    • Universal AC input / full range
    • Built-in battery rescue function
    • Built in active PFC function PF>0.95
    • Controlled by microprocessor
    • Protections: Short circuit / Reverse Polarity / Over voltage / Over temperature
    • Built remote ON/OFF control
    • Built in remote ON/OFF control
    • Built in temperature compensation function
    • Built in fan speed control (depends on charging current)
    • 3 colour LED loading indicator
    • 3 years warranty
    More information Compare
  • 600W Single Output Harsh Environment Battery Chargers

    HEP-600C series is an AC-to-DC battery charger providing power up to 600Watts, designed with aluminium case and fully potted by silicone for waterproof capabilities. It features up to 95.5% high efficiency and <0.5Watt low no-load power consumption at remote OFF. Incorporating state of the art design, the fan-less HEP-600C is capable of working under high-vibration…

    Features

    • 3 stage charging
    • Universal AC input / Full range (up to 305VAC)
    • Built-in active PFC function
    • No load power consumption <0.5W at remote OFF
    • High efficiency up to 95%
    • Aluminium case and filling with heat-conducted glue
    • -40 ~ +70℃ wide operating range
    • Withstand 5G vibration test
    • Short circuit, Over voltage, Over temperature protections
    • Fanless design, cooling by free air convection
    • Charger for lead-acid batteries
    • 3 color LED loading indicator
    • 5 years warranty on approved installations
    More information Compare
  • 600W Single Output Harsh Environment Enclosed Power Supplies

    HEP-600 series is a high-efficiency and waterproof AC-to-DC industrial power supply with power up to 600Watts, fully potted by silicone and enclosed within an aluminium case. HEP-600 works outstandingly with electronics under harsh environments such as fan-less, high-vibration, dusty, humid, and oily conditions. Its remarkable features include supreme efficiency up to 96%, low no-load power…

    Features

    • Universal AC input / Full range (up to 264VAC)
    • Built-in active PFC function
    • No load power consumption <0.5W at remote OFF
    • High efficiency up to 96%
    • Aluminium case and fully potted with heat-conducted silicone
    • -40 to +70C wide operating range
    • Withstand 5G vibration test
    • Short circuit, Over current, Over voltage, Over temperature protections
    • Fanless design, cooling by free air convection
    • Output current and voltage adjustable through internal potentiometer
    • LED indicator for power on
    • 5 years warranty on approved installations
    More information Compare
  • 60W Single Output Switching DIN RAIL Power Supplies with UPS Function

    DRC-60 series is a range if 60W single output power supplies with battery charger output, designed to be mounted on TS-35/7.5 or TS-35/15 DIN rails. In addition to the primary output, an additional lower current charger output is included for use along with an external battery (not included) within security systems with DC UPS function….

    Features

    • Universal AC input
    • Secondary output for battery charging (UPS Function)
    • Battery low protection/Battery polarity protection by fuse
    • Alarm signal for AC OK and Battery low
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Short circuit, overload, over voltage protection
    • Cooling by free air convection
    • LED indicator for power on
    • 3 years warranty
    More information Compare
  • Battery Charger

    Designed for lead acid batteries featuring 3 stage charging characteristics and the automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-300 can comply with the harmonic requirements…

    Features

    • 3 stage charging
    • AC 115/230VAC selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
    • Protection:Reverse Polarity/Short circuit/Over voltage/Over temperature
    • Cooling by free air convection
    • Charger for lead-acid batteries
    • 2 color LED loading indicator
    • Low cost, High reliability
    More information Compare
  • Battery Charger, 360W

    Designed for lead acid batteries (flooded, Gel and AGM) and featuring 3 stage charging characteristics, automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-360 can comply with…

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • 3 stage charging
    • AC 115/230Vac selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
    • Protections: Short circuit / Reverse Polarity / Overload / Over temperature
    • 2 colour LED loading indicator
    • Low cost, High reliability
    • Fan ON / OFF control (Depends on charging current)
    • 3 years warranty
    More information Compare
  • Car Sealed Lead Acid Battery Charger

    Features

    • AC input range selected by switch
    • Short circuit, over load, over voltage, over temperature protection
    • Battery under/over voltage and polarity protection
    • Fixed switching frequency at 25KHz
    • 3 colour LED loading indicator
    More information Compare
  • Car SLA Battery Charger

    Features

    • AC input range selected by switch
    • Protections:Short circuit/over load/over voltage/over temperature
    • Battery under/over voltage and polarity protection
    • Forced air cooling by built-in DC fan
    • Fixed switching frequency at 25KHz
    • 3 colour LED loading indicator
    More information Compare

Sunpower have an extensive range of Industrial Battery Chargers capable of delivering a top of the range product for a variety of requirements. These can also be suitable for charging vehicles, including trucks, motorcycles, marine applications and even standard appliances. With Lead-Acid, Gel, Flooded, AGM and Lithium-ion chargers available, Sunpower’s range can suit numerous applications with up to 8000W versions available, and Float 2, 3 and 8 Stage charging solutions.

They all come with Universal Input and up to 10G vibration, allowing for an easy-to-use and stable product. In addition, Sunpower can also offer fully programmable charging curve upon request and parallel functionality throughout the range. Our Industrial Battery Chargers also come with the highest in safety and security, with short circuit, over voltage, overload, over temperature and reverse polarity protection benefits in all models.

The range of Industrial Battery Chargers that Sunpower host include GC30, GC120, GC160, GC220, GC330, PA/PB-120/230, ESC-120/240, ENC-120/180/240/360, PB-300/360/600/1000, HEP-600C, RPB-1600, RCB-1600 Series

Can’t find the industrial battery charger that you’re looking for? By using Sunpower’s advanced search feature, you can directly filter in or out, specific features in order to find the right charger for you. Alternatively, you can use our standard search facility at the top of the page and enter in a product’s name or code to be taken straight to the Industrial Battery Charger that you’re looking for.

For more information on how Sunpower can help, speak to our expert team on 0118 9823746.